V-belt Gates C 360
- Brand
- GATES
- Category
- Power transmission
- Subcategory
- V-belts
- Section
- C
- Series
- Hi-Power II
We reply promptly.
Tell us the quantity you need and request a quote by WhatsApp or email.
Other brands for this category
Ask us for alternatives. We check every equivalent against the part number and your application.
Can't find the exact model? Tell us the part number or model you need. We'll track it down and quote it, whether or not it appears in our catalog.
Description
GATES C 360 belongs to v-belt, part of our Power transmission range. Tell us how many you need by WhatsApp or email and we'll get back to you promptly with a quote for C 360 and any equivalents.
The Gates Hi-Power II C 360 is a classical V-belt with a C profile and a length of 9194.8 mm. This page covers how to match it to the belt being replaced and what to check before you request a quote.
If you are replacing a worn belt, start with the marking on the back of the old belt. It should show the profile and a length designation that corresponds to C 360. Confirm the profile is C and the length is 9194.8 mm. The belt has a top width of 22 mm, a height of 14 mm and a 40-degree angle. The same size is also listed under Optibelt C 360, which may help you identify an equivalent when the old marking is hard to read.
Inspect the drive before ordering. Check sheave grooves for wear, alignment and any damage that could shorten belt life. If the drive uses multiple belts, replace them as a set so the load is shared evenly. Record the part number and quantity you need, then send it to us by WhatsApp or email. We carry the Gates Hi-Power II C 360 and can confirm the right belt or suggest an equivalent.
Dimensions
- Section
- C
- Length
- 9194.8mm
Frequently asked questions
- How do I confirm this is the right belt for my drive?
- Read the marking on the back of the belt you are replacing. It should show the C profile and a length designation matching C 360. If the marking is worn, measure the outside length and compare it to 9194.8 mm. You can also send us the old part number and photos of the drive.
- What are the dimensions of the Gates Hi-Power II C 360?
- It has a C profile, a length of 9194.8 mm, a top width of 22 mm, a height of 14 mm and a 40-degree angle.
- Can you help if I need a different length or profile?
- Yes. Send us the part number you need and the details from the old belt. We will confirm the right belt or suggest an equivalent.