V-belt Gates C 290
- Brand
- GATES
- Category
- Power transmission
- Subcategory
- V-belts
- Section
- C
- Series
- Hi-Power II
We reply promptly.
Tell us the quantity you need and request a quote by WhatsApp or email.
Can't find the exact model? Tell us the part number or model you need. We'll track it down and quote it, whether or not it appears in our catalog.
Description
GATES C 290 belongs to v-belt, part of our Power transmission range. Tell us how many you need by WhatsApp or email and we'll get back to you promptly with a quote for C 290 and any equivalents.
The Gates Hi-Power II C 290 is a classical V-belt with a C profile and a length of 7416.8 mm. To match it to the belt being replaced, compare the profile and length on the belt you are removing with these values.
Start by reading the marking on the back of the old belt. The profile is C, the top width is 22 mm, the height is 14 mm and the angle is 40 degrees. The length is 7416.8 mm. If the marking is worn or missing, measure the outside length and check the cross-section against these dimensions.
When the profile and length match, the C 290 is the correct replacement for that drive position. If the old belt carries a different part number but the same profile and length, it can be considered as an equivalent for the application. For drives with multiple belts, replace all belts in the set at the same time so the load is shared evenly.
Send the part number C 290 by WhatsApp or email to request a quote. Include the quantity and the drive position if you have it. The team can confirm the right belt or suggest an equivalent based on the profile and length you provide.
Dimensions
- Section
- C
- Length
- 7416.8mm
Frequently asked questions
- How do I confirm the C 290 is the right belt for my drive?
- Check the marking on the old belt. The C 290 has a C profile, a top width of 22 mm, a height of 14 mm, an angle of 40 degrees and a length of 7416.8 mm. If these match, it is the correct replacement.
- What should I send to request a quote?
- Send the part number C 290 and the quantity you need by WhatsApp or email. If you are unsure of the part number, send the profile and length from the old belt.
- Should I replace all belts on a multi-belt drive at once?
- Yes. Replacing all belts in the set at the same time helps maintain even load sharing across the drive.