V-belt Gates C 230
- Brand
- GATES
- Category
- Power transmission
- Subcategory
- V-belts
- Section
- C
- Series
- Hi-Power II
We reply promptly.
Tell us the quantity you need and request a quote by WhatsApp or email.
Other brands for this category
Ask us for alternatives. We check every equivalent against the part number and your application.
Can't find the exact model? Tell us the part number or model you need. We'll track it down and quote it, whether or not it appears in our catalog.
Description
GATES C 230 belongs to v-belt, part of our Power transmission range. Tell us how many you need by WhatsApp or email and we'll get back to you promptly with a quote for C 230 and any equivalents.
The Gates Hi-Power II C 230 is a classical V-belt with a C profile and a length of 5892.8 mm. To match it to the belt being replaced, compare the marking on the old belt and the measured dimensions against this listing. Same size is also listed under Stark C 230.
Start by reading the old belt. If it is marked C 230, this Gates Hi-Power II belt matches that callout. If the marking is worn or missing, measure the top width and the outside length and compare them with the 22 mm top width and 5892.8 mm length shown here. The 40-degree angle is another check point when the belt is seated in the pulley groove.
A C profile belt is a classical V-belt, so confirm the pulley groove is cut for a C section before ordering. The Hi-Power II series is built for drives where a classical V-belt is specified. If the drive runs several belts, inspect all of them and replace the set together so the load stays even across the grooves.
When you request a quote, send the part number C 230, the brand Gates, and the profile and length from the old belt if they differ. Our team replies by WhatsApp or email and can confirm the right belt or suggest an equivalent. For customers in the United States, Canada, Mexico and South America, we carry the Gates Hi-Power II line.
Dimensions
- Section
- C
- Length
- 5892.8mm
Frequently asked questions
- How do I confirm this belt matches the one being replaced?
- Check the marking on the old belt for C 230. If it is not legible, measure the top width and outside length and compare them with the 22 mm top width and 5892.8 mm length listed for this belt.
- Can I use this belt if the old belt is a different brand?
- Yes, if the profile and length match. This belt is a C profile classical V-belt with a 5892.8 mm length, and the same size is also listed under Stark C 230.
- What should I send to get a quote?
- Send the part number C 230 and the brand Gates. If you have the old belt, include the profile and length from its marking so we can confirm the match or suggest an equivalent.