V-belt Gates C 205
- Brand
- GATES
- Category
- Power transmission
- Subcategory
- V-belts
- Section
- C
- Series
- Hi-Power II
We reply promptly.
Tell us the quantity you need and request a quote by WhatsApp or email.
Can't find the exact model? Tell us the part number or model you need. We'll track it down and quote it, whether or not it appears in our catalog.
Description
GATES C 205 belongs to v-belt, part of our Power transmission range. Tell us how many you need by WhatsApp or email and we'll get back to you promptly with a quote for C 205 and any equivalents.
The Gates Hi-Power II C 205 is a classical V-belt with a C profile and a length of 5308.6 mm. This page covers how to match it to the belt being replaced. Request a quote by part number via WhatsApp or email, and we can help confirm the right belt or suggest an equivalent.
To match the belt being replaced, start with the marking on the back of the old belt. Compare the profile and length: this belt is profile C with a length of 5308.6 mm. Its top width is 22 mm, its height is 14 mm, and its angle is 40°. If those values match the belt in service, the Gates Hi-Power II C 205 is the correct replacement.
When the marking is worn or unreadable, measure the old belt. Confirm the cross-section and the length, then compare them to the profile and length above. A belt that is too short or too long will not seat correctly in the pulley grooves, and a different profile will not transmit load as intended.
For a quote, send the part number and the quantity you need. If you are unsure between this belt and another, include the old belt's marking or its measured profile and length. We carry the Gates Hi-Power II line and can help confirm the right belt or suggest an equivalent based on the data you provide.
Dimensions
- Section
- C
- Length
- 5308.6mm
Frequently asked questions
- How do I confirm the Gates Hi-Power II C 205 is the belt I need?
- Check the marking on the back of the old belt and compare its profile and length to this belt: profile C, length 5308.6 mm, top width 22 mm, height 14 mm, angle 40°. If they match, it is the correct replacement.
- What should I send to request a quote?
- Send the part number C 205 and the quantity. If you are unsure, include the old belt's marking or its measured profile and length so we can help confirm the right belt or suggest an equivalent.
- Can you help if the old belt marking is unreadable?
- Yes. Measure the old belt's cross-section and length, then compare them to the profile and length above. Send those measurements with your request, and we can help confirm the right belt or suggest an equivalent.