V-belt Gates C 174
- Brand
- GATES
- Category
- Power transmission
- Subcategory
- V-belts
- Section
- C
- Series
- Delta Classic
We reply promptly.
Tell us the quantity you need and request a quote by WhatsApp or email.
Other brands for this category
Ask us for alternatives. We check every equivalent against the part number and your application.
Can't find the exact model? Tell us the part number or model you need. We'll track it down and quote it, whether or not it appears in our catalog.
Description
GATES C 174 belongs to v-belt, part of our Power transmission range. Tell us how many you need by WhatsApp or email and we'll get back to you promptly with a quote for C 174 and any equivalents.
This Gates Delta Classic C 174 is a classical V-belt with a C profile and a length of 4417 mm. It is used on drives that accept classical C-section belts, such as those found on industrial machinery and process equipment. Confirm fit by checking the existing belt's profile and length against these dimensions.
The C profile gives this belt a top width of 22 mm and a height of 14 mm, with a 40-degree angle. These dimensions match the standard C-section envelope, so the belt seats correctly in a C-profile pulley groove. The 4417 mm length is the datum length for this part number.
To confirm fit, read the marking on the back of the old belt. If it shows C 174, this Gates Delta Classic belt matches that callout. Also measure the top width and height of the old belt with a caliper, and check the pulley groove profile. If the drive uses a different section or length, the belt will not seat or tension correctly.
The same size is also listed under Mitsuboshi as C 174. If you need to match an existing installation, send the part number, the profile and length, and a photo of the belt marking. The team can confirm the C 174 and help you compare it to the belt being replaced.
Dimensions
- Section
- C
- Length
- 4417mm
Frequently asked questions
- What does the C 174 marking on my old belt mean?
- C indicates the classical V-belt profile, and 174 is the length code. This Gates Delta Classic C 174 has a C profile and a length of 4417 mm. If your old belt is marked C 174, it matches this size.
- How do I check that this belt fits my drive?
- Measure the top width and height of the old belt and compare them to 22 mm and 14 mm. Check the pulley groove profile is for a C-section belt. Confirm the old belt's length is 4417 mm or that its marking is C 174.
- Can I use this belt if my old belt is a different brand?
- Yes, if the profile and length match. The same size is also listed under Mitsuboshi as C 174. Send the part number and a photo of the old belt marking, and the team can help confirm the match.