V-belt Gates C 137
- Brand
- GATES
- Category
- Power transmission
- Subcategory
- V-belts
- Section
- C
- Series
- Hi-Power II
We reply promptly.
Tell us the quantity you need and request a quote by WhatsApp or email.
Can't find the exact model? Tell us the part number or model you need. We'll track it down and quote it, whether or not it appears in our catalog.
Description
GATES C 137 belongs to v-belt, part of our Power transmission range. Tell us how many you need by WhatsApp or email and we'll get back to you promptly with a quote for C 137 and any equivalents.
The Gates Hi-Power II C 137 is a classical V-belt in the C profile. If you are replacing a belt on an existing drive, the marking on the back of the old belt is the fastest way to confirm what you need.
Read the marking before you order. A C 137 belt carries its part number on the back, and that number identifies both the profile and the length. The C profile is a classical V-belt section with a 22 mm top width, a 14 mm height and a 40 degree angle. The length is 3581.4 mm. Compare those figures with the belt in your hand, and check the drive for any second belt running alongside it.
When the old belt is worn, frayed or stretched, the marking may be hard to read. Measure the top width and the outside length, and note the drive sheave grooves and the equipment the belt runs on. Send that information with the part number, and we can confirm the C 137 or help you find the right belt for the drive.
Belts on the same drive wear at the same rate, so order the full set rather than one belt at a time. We carry the Gates Hi-Power II line and quote by part number.
Dimensions
- Section
- C
- Length
- 3581.4mm
Frequently asked questions
- How do I confirm the belt I need?
- Read the marking on the back of the old belt and send it to us. The C 137 marking gives the profile and the length, which is what we use to match the belt.
- What are the dimensions of this belt?
- The C profile has a 22 mm top width, a 14 mm height and a 40 degree angle. The length is 3581.4 mm.
- What should I send with my quote request?
- Send the part number, the quantity, the drive sheave groove details and the equipment the belt runs on. If the old belt is unreadable, send the measured top width and outside length instead.