V-belt Gates C 133
- Brand
- GATES
- Category
- Power transmission
- Subcategory
- V-belts
- Section
- C
- Series
- Hi-Power II
We reply promptly.
Tell us the quantity you need and request a quote by WhatsApp or email.
Other brands for this category
Ask us for alternatives. We check every equivalent against the part number and your application.
GATES and MITSUBOSHI: matching part numbers →GATES and STARK: matching part numbers →
Can't find the exact model? Tell us the part number or model you need. We'll track it down and quote it, whether or not it appears in our catalog.
Description
GATES C 133 belongs to v-belt, part of our Power transmission range. Tell us how many you need by WhatsApp or email and we'll get back to you promptly with a quote for C 133 and any equivalents.
The Gates Hi-Power II C 133 is a classical V-belt in the C profile, built for the heavy-duty drives found on industrial machinery and plant equipment. Its 3479.8 mm length and 22 mm top width suit larger sheave diameters where a narrower belt would not carry the load.
Classical V-belts in the C profile are common on drives that run at moderate speed with substantial torque demand, such as large fans, blowers, compressors, pumps and process line equipment. The 40 degree angle and 14 mm height match standard C-section sheave grooves, so the belt seats correctly and transmits load across the full flank.
To confirm fit, read the marking on the back of the old belt and compare it against the profile and length here. Measure the outside length only if the marking is worn away, and check the sheave groove for wear, glazing or debris before installing a replacement.
The same size is also listed under Mitsuboshi C 133 and Stark C 133, so those numbers may appear on a machine you are servicing. If you are unsure which belt belongs on a drive, send the part number, the sheave dimensions and a photo of the old belt by WhatsApp or email and the team will confirm the right belt or suggest an equivalent.
Dimensions
- Section
- C
- Length
- 3479.8mm
Frequently asked questions
- How do I confirm that the C 133 is the correct belt for my drive?
- Check the marking on the back of the belt you are replacing. If it reads C 133, the profile and length match this Gates Hi-Power II belt. If the marking is gone, measure the sheave groove width and the outside length of the old belt and send those figures with your quote request.
- What should I include with a quote request for this belt?
- Send the part number C 133, the quantity you need, and the machine or drive it fits. A photo of the old belt and the sheave helps the team confirm the profile and length before quoting.
- Should I replace all belts on a multi-belt drive at once?
- On a drive that uses more than one belt, replacing the full set together keeps tension even across the grooves. Mixing a new belt with worn ones can cause the new belt to carry more than its share of the load.