V-belt Gates C 113

GATES C 113 belongs to v-belt, part of our Power transmission range. Tell us how many you need by WhatsApp or email and we'll get back to you promptly with a quote for C 113 and any equivalents.

When a classical V-belt needs replacing, the marking on the back of the old belt is the fastest way to identify what you need. This page covers the Gates Hi-Power II C 113, a C profile classical V-belt with a length of 2971.8 mm. Read the code off the belt and match it here before you order.

The C 113 carries a C profile with a 22 mm top width, 14 mm height and a 40 degree angle. Its listed length is 2971.8 mm. These are the figures to check against the belt you are removing, since a worn or stretched belt can be hard to measure accurately on the drive. The marking on the back of the belt is the reference point, not a tape measure run around a slack belt.

If the back of the belt is worn or dirty, clean the area around the code and read it under good light before you pull the belt off. Note the full part number, the profile letter, and any length figure printed alongside it. Where the marking has rubbed away, measure the top width and the outside length and send those numbers instead so the belt can be matched.

The same size is also listed under Stark as C 113, which is useful when you are comparing what is already on the shelf. Send the part number, the profile and the length by WhatsApp or email and the team will confirm the belt or suggest an equivalent.