V-belt Gates BX 96
- Brand
- GATES
- Category
- Power transmission
- Subcategory
- V-belts
- Section
- BX
- Series
- Tri-Power
We reply promptly.
Tell us the quantity you need and request a quote by WhatsApp or email.
Other brands for this category
Ask us for alternatives. We check every equivalent against the part number and your application.
GATES and OPTIBELT: matching part numbers →DAYCO and GATES: matching part numbers →
Can't find the exact model? Tell us the part number or model you need. We'll track it down and quote it, whether or not it appears in our catalog.
Description
GATES BX 96 belongs to v-belt, part of our Power transmission range. Tell us how many you need by WhatsApp or email and we'll get back to you promptly with a quote for BX 96 and any equivalents.
This Gates Tri-Power BX 96 is a cogged classical V-belt with a BX profile and a length of 2515 mm. Cogged classical V-belts are commonly used on industrial drives where a standard wrapped belt may not handle the small pulley diameters or where cooler running is preferred.
To confirm fit, check the existing belt for the profile and length marking. The BX profile and 2515 mm length are the key dimensions. If the old belt is worn or the marking is unreadable, measure the outside length and the top width and compare to the BX profile and 2515 mm length.
The same size is also listed under Optibelt BX 96 and Dayco BX 96. When you request a quote, send the part number BX 96, the brand you prefer, and the quantity. If you are unsure between the old belt and this one, send a photo of the belt marking and the drive sheaves.
For drives using multiple belts, replace the full set at the same time so the load is shared evenly. Inspect sheave grooves for wear and check the belt tension after installation. A cogged belt can run on smaller pulleys than a wrapped belt of the same profile, which is why it is often specified on compact drives.
Dimensions
- Section
- BX
- Length
- 2515mm
Frequently asked questions
- How do I confirm that the Gates Tri-Power BX 96 is the right belt for my drive?
- Check the marking on the old belt for the profile BX and the length 2515 mm. If the marking is not clear, measure the outside length and the top width and compare them to the BX profile and 2515 mm length. You can also send a photo of the old belt and the drive sheaves for confirmation.
- What information should I send with my quote request?
- Send the part number BX 96, the quantity you need, and any preference for the brand. If you are replacing a set, include the number of belts on the drive. A photo of the old belt marking helps confirm the profile and length.
- Is the same size listed under other brands?
- Yes, the same size is also listed under Optibelt BX 96 and Dayco BX 96. We carry Gates and can help you confirm the equivalent if you prefer a different brand.