V-belt Gates BX 89
- Brand
- GATES
- Category
- Power transmission
- Subcategory
- V-belts
- Section
- BX
- Series
- Tri-Power
We reply promptly.
Tell us the quantity you need and request a quote by WhatsApp or email.
Other brands for this category
Ask us for alternatives. We check every equivalent against the part number and your application.
GATES and STARK: matching part numbers →GATES and MITSUBOSHI: matching part numbers →DAYCO and GATES: matching part numbers →
Can't find the exact model? Tell us the part number or model you need. We'll track it down and quote it, whether or not it appears in our catalog.
Description
GATES BX 89 belongs to v-belt, part of our Power transmission range. Tell us how many you need by WhatsApp or email and we'll get back to you promptly with a quote for BX 89 and any equivalents.
This page covers the Gates Tri-Power BX 89, a cogged classical V-belt with a BX profile and a length of 2337 mm. It is used on industrial drives where a classical B-section belt is specified and a cogged construction is preferred. The same size is also listed under Stark BX 89, Mitsuboshi BX 89 and Dayco BX 89.
Cogged classical V-belts like this one are common on drives that run over relatively small pulleys, where the molded teeth on the underside help the belt flex. The BX profile and 2337 mm length are the two dimensions to confirm before ordering. If your drive calls for a BX section belt and the old belt measures 2337 mm, this is the size to quote.
To confirm fit, read the marking on the back of the belt you are replacing. Compare the profile and the length to the BX and 2337 mm given here. Also check the pulley grooves for wear, oil or debris, and make sure the drive is aligned and the belt tension is set to the equipment manufacturer's specification. If a drive uses more than one belt, replace the full set at the same time.
If the marking is worn off, measure the outside length of the old belt and note the cross-section. Send the part number, the profile and the length by WhatsApp or email and the team will confirm the right belt or suggest an equivalent. The same size is also listed under Stark BX 89, Mitsuboshi BX 89 and Dayco BX 89.
Dimensions
- Section
- BX
- Length
- 2337mm
Frequently asked questions
- What size is the Gates Tri-Power BX 89?
- It has a BX profile and a length of 2337 mm. The same size is also listed under Stark BX 89, Mitsuboshi BX 89 and Dayco BX 89.
- How do I confirm this belt fits my drive?
- Read the marking on the back of the old belt and compare the profile and length to the BX and 2337 mm given here. Check the pulley grooves and alignment, and if the drive uses multiple belts, replace the set together.
- What should I send for a quote?
- Send the part number, the profile and the length by WhatsApp or email. If the marking is worn, measure the outside length of the old belt and note the cross-section.