V-belt Gates BX 225
- Brand
- GATES
- Category
- Power transmission
- Subcategory
- V-belts
- Section
- BX
- Series
- Tri-Power
We reply promptly.
Tell us the quantity you need and request a quote by WhatsApp or email.
Can't find the exact model? Tell us the part number or model you need. We'll track it down and quote it, whether or not it appears in our catalog.
Description
GATES BX 225 belongs to v-belt, part of our Power transmission range. Tell us how many you need by WhatsApp or email and we'll get back to you promptly with a quote for BX 225 and any equivalents.
This Gates Tri-Power belt is a cogged classical V-belt in the BX profile with a length of 5792 mm. The BX profile and the 5792 mm length are the two numbers to match when you select a replacement. Use them to confirm the belt will fit your drive before you request a quote.
The BX profile sets the cross-section that seats in the pulley groove. The 5792 mm length sets the belt's reach around the drive. Both must match the belt you are replacing; a belt that differs in either dimension will not run correctly. Check the marking on the back of the old belt for the profile and length, or measure the drive and compare against these values.
Cogged construction is typical of this belt type. The molded cogs on the underside help the belt flex as it runs over the pulleys. That makes it suitable for drives where the belt bends repeatedly around smaller pulleys. Inspect the pulleys and the rest of the drive when you replace the belt, and replace belts in sets where the drive uses more than one.
To request a quote, send the part number BX 225, the brand Gates, and the profile and length shown here. If you are unsure whether this is the correct belt for your drive, include the old belt's marking and any details about the pulleys. Our team replies promptly and can help confirm the right belt or suggest an equivalent.
Dimensions
- Section
- BX
- Length
- 5792mm
Frequently asked questions
- What do the BX profile and 5792 mm length mean for my drive?
- The BX profile is the belt's cross-section, which must match the pulley groove. The 5792 mm length is the belt's outside length, which must match the drive's required length. Both values need to match the belt you are replacing.
- How do I confirm this is the right belt for my equipment?
- Check the marking on the back of the old belt for the profile and length. If it reads BX and 5792 mm, this belt matches those dimensions. If you cannot read the marking, send us details about the drive and pulleys.
- What should I send to request a quote?
- Send the part number BX 225, the brand Gates, and the profile and length. If you are replacing an existing belt, include the old belt's marking. We will confirm the belt or suggest an equivalent.