V-belt Gates BX 116
- Brand
- GATES
- Category
- Power transmission
- Subcategory
- V-belts
- Section
- BX
- Series
- Tri-Power
We reply promptly.
Tell us the quantity you need and request a quote by WhatsApp or email.
Other brands for this category
Ask us for alternatives. We check every equivalent against the part number and your application.
GATES and OPTIBELT: matching part numbers →DAYCO and GATES: matching part numbers →
Can't find the exact model? Tell us the part number or model you need. We'll track it down and quote it, whether or not it appears in our catalog.
Description
GATES BX 116 belongs to v-belt, part of our Power transmission range. Tell us how many you need by WhatsApp or email and we'll get back to you promptly with a quote for BX 116 and any equivalents.
When you pull the old belt off a drive, the marking printed on its back is the fastest way to confirm what you need. This page covers the Gates Tri-Power BX 116, a cogged classical V-belt in the BX profile with a length of 3023 mm. Read that marking before you order so the replacement matches the drive.
The back of a worn belt usually carries the profile and the length. On this belt, the marking identifies a BX profile and a length of 3023 mm. Check those characters against the belt you are replacing, especially if the drive has been reworked or the old belt was installed from a mixed batch.
This is a cogged classical V-belt from the Gates Tri-Power series. The same size is also listed under Optibelt BX 116 and Dayco BX 116. If the marking on your old belt is faded or rubbed away, measure the length and note the profile, then send both when you request a quote.
For a quote, send the part number BX 116 along with the profile and length from the old belt. If the marking is hard to read, a photo of the belt back and the drive helps us confirm the right belt or suggest an equivalent.
Dimensions
- Section
- BX
- Length
- 3023mm
Frequently asked questions
- What marking should I look for on the old belt?
- Look for the profile and length on the back of the belt. For this belt, the marking shows a BX profile and 3023 mm. Match those characters to the replacement.
- Can I use a different brand if the size matches?
- The same size is also listed under Optibelt BX 116 and Dayco BX 116. Send the marking from your old belt and we can help confirm the right belt or suggest an equivalent.
- What do I send to request a quote?
- Send the part number BX 116, the profile BX and the length 3023 mm. If the marking is worn, a photo of the belt back and the drive helps us confirm the correct belt.