V-belt Gates BX 110

GATES BX 110 belongs to v-belt, part of our Power transmission range. Tell us how many you need by WhatsApp or email and we'll get back to you promptly with a quote for BX 110 and any equivalents.

When you need to replace a belt, the marking on the old belt is your starting point. This page covers the Gates Tri-Power BX 110, a cogged classical V-belt with a BX profile and a length of 2871 mm. Use these details to confirm it matches your drive before you request a quote.

The marking on the back of a belt tells you the profile and the length. On this Gates Tri-Power belt, the code BX 110 identifies a BX profile and a length of 2871 mm. Check that the old belt shows the same profile and length. If the marking is worn or unreadable, measure the belt or note the drive and sheave details so we can help you confirm the right belt.

This is a cogged classical V-belt, which means it has a notched construction. The BX profile is a narrow cross-section. The 2871 mm length is the datum length. When you replace a belt, inspect the sheaves for wear and check the alignment of the drive. A worn sheave can shorten belt life, so it is worth checking before you install a new belt.

If you are replacing multiple belts on the same drive, it is good practice to replace them as a set. Mixed belts can cause uneven loading. To request a quote for the Gates Tri-Power BX 110, send us the part number and the quantity you need via WhatsApp or email. If you are unsure, send a photo of the old belt marking and we can help confirm the right belt or suggest an equivalent.