V-belt Gates BX 100
- Brand
- GATES
- Category
- Power transmission
- Subcategory
- V-belts
- Section
- BX
- Series
- Tri-Power
We reply promptly.
Tell us the quantity you need and request a quote by WhatsApp or email.
Other brands for this category
Ask us for alternatives. We check every equivalent against the part number and your application.
GATES and MITSUBOSHI: matching part numbers →GATES and OPTIBELT: matching part numbers →DAYCO and GATES: matching part numbers →
Can't find the exact model? Tell us the part number or model you need. We'll track it down and quote it, whether or not it appears in our catalog.
Description
GATES BX 100 belongs to v-belt, part of our Power transmission range. Tell us how many you need by WhatsApp or email and we'll get back to you promptly with a quote for BX 100 and any equivalents.
This Gates Tri-Power BX 100 is a cogged classical V-belt with a BX profile and a length of 2617 mm. To match it, read the marking on the back of the belt you are replacing and compare the profile and length.
The marking on the back of the old belt is the starting point. Confirm the profile reads BX and the length is 2617 mm. The same size is also listed under Mitsuboshi BX 100, Optibelt BX 100 and Dayco BX 100, so you can compare those markings directly.
If the marking is worn or unreadable, measure the outside length and check the profile against the pulley groove. A cogged classical V-belt such as this one has a raw-edge, cogged construction, which is typical for this type. Send the part number, the profile and the length you measured so we can confirm it against the BX 100.
When you request a quote, include the belt part number, the quantity and the drive it runs on. If you are replacing a set, list every belt on that drive so the replacements can be matched as a set. We can help confirm the right belt or suggest an equivalent.
Dimensions
- Section
- BX
- Length
- 2617mm
Frequently asked questions
- How do I confirm this is the correct replacement?
- Read the marking on the back of your old belt. It should show the BX profile and 2617 mm. If the marking is unreadable, measure the outside length and check the profile against the pulley groove.
- What should I send to request a quote?
- Send the part number BX 100, the quantity and the drive it runs on. If you are replacing a set, list every belt on that drive.