V-belt Gates BB 64
- Brand
- GATES
- Category
- Power transmission
- Subcategory
- V-belts
- Section
- BB
- Series
- Hi-Power Dubl-V
We reply promptly.
Tell us the quantity you need and request a quote by WhatsApp or email.
Other brands for this category
Ask us for alternatives. We check every equivalent against the part number and your application.
Can't find the exact model? Tell us the part number or model you need. We'll track it down and quote it, whether or not it appears in our catalog.
Description
GATES BB 64 belongs to v-belt, part of our Power transmission range. Tell us how many you need by WhatsApp or email and we'll get back to you promptly with a quote for BB 64 and any equivalents.
The Gates BB 64 is a double-V (hexagonal) belt in the Hi-Power Dubl-V series, with a BB profile and a length of 1702 mm. Before you fit it, inspect the drive and sheaves so the new belt runs correctly from the start.
Check sheave grooves for wear, rust, or embedded debris. Worn grooves can let a new double-V belt sit too deep, causing slip and heat. Confirm sheave alignment with a straightedge or laser, and correct any offset or angular misalignment before installing the belt. Verify that the sheaves match the BB profile and that the drive is stopped and locked out.
Inspect the old belt for uneven sidewall wear, cracks, or glazing, and note whether it failed early. Look at bearings and shafts for play or rough rotation. If the drive uses multiple belts, replace them as a set so loads stay balanced. Keep sheaves clean and free of oil or grease.
The same size is also listed under Stark BB 64. Send the part number, the belt marking, and a photo of the drive by WhatsApp or email to request a quote.
Dimensions
- Section
- BB
- Length
- 1702mm
Frequently asked questions
- What should I check on the drive before fitting this belt?
- Inspect sheave grooves for wear, rust, or debris, confirm sheave alignment, and check bearings and shafts for play. Correct any issues before installing the belt.
- Should I replace multiple belts at the same time?
- Yes. On a multi-belt drive, replace all belts as a set so they share the load evenly and wear at the same rate.
- What do I need to send for a quote?
- Send the part number, the belt marking, and a photo of the drive by WhatsApp or email. We will confirm the belt or suggest an equivalent.