V-belt Gates B 66 PowerBand
- Brand
- GATES
- Category
- Power transmission
- Subcategory
- V-belts
- Section
- B
- Series
- Hi-Power PowerBand
We reply promptly.
Tell us the quantity you need and request a quote by WhatsApp or email.
Can't find the exact model? Tell us the part number or model you need. We'll track it down and quote it, whether or not it appears in our catalog.
Description
GATES B 66 PowerBand belongs to v-belt, part of our Power transmission range. Tell us how many you need by WhatsApp or email and we'll get back to you promptly with a quote for B 66 PowerBand and any equivalents.
The Gates B 66 PowerBand is a banded V-belt in the Hi-Power PowerBand series, built for drives that need multiple belts to stay tied together. Before you fit a new belt, take a few minutes to inspect the drive and sheaves. A worn or misaligned sheave will shorten the life of any belt, no matter how good the belt is.
Check each sheave groove for wear, rust, or buildup. Look for a ridge at the bottom of the groove, which means the belt is no longer gripping the sides. Spin the sheaves by hand and feel for wobble or rough bearings. Confirm that the sheaves are aligned with a straightedge across the faces. If the old belt failed early, the sheave condition is often the reason.
The B 66 PowerBand is a banded V-belt with a length of 1676 mm. Banded construction keeps the individual belts in the set from turning over or jumping out of the grooves. When you replace a banded belt, replace the whole set at once. Mixing old and new belts on the same drive causes uneven tension and early failure.
To request a quote, send the part number B 66 PowerBand by WhatsApp or email. If you are not sure this is the right belt, include the drive details and photos of the sheaves and the old belt. The team will confirm the belt or suggest an equivalent.
Dimensions
- Length
- 1676mm
Frequently asked questions
- What should I check on the sheaves before installing this belt?
- Inspect each groove for wear, rust, or a ridge at the bottom. Check the sheaves for wobble and the bearings for rough movement. Make sure the sheaves are aligned with a straightedge.
- Why replace all the belts in a banded set at the same time?
- Banded belts are designed to work as a set. If you mix new and old belts, the older ones may carry more load or sit at a different tension. Replacing the full set keeps the drive running evenly.
- What information do you need to quote the Gates B 66 PowerBand?
- Send the part number B 66 PowerBand by WhatsApp or email. If you want us to confirm the fit, include the drive details and photos of the sheaves and the old belt.