V-belt Gates B 253
- Brand
- GATES
- Category
- Power transmission
- Subcategory
- V-belts
- Section
- B
- Series
- Hi-Power II
We reply promptly.
Tell us the quantity you need and request a quote by WhatsApp or email.
Can't find the exact model? Tell us the part number or model you need. We'll track it down and quote it, whether or not it appears in our catalog.
Description
GATES B 253 belongs to v-belt, part of our Power transmission range. Tell us how many you need by WhatsApp or email and we'll get back to you promptly with a quote for B 253 and any equivalents.
The Gates Hi-Power II B 253 is a classical V-belt in a B profile. It measures 6451.6 mm in length, with a 17 mm top width, an 11 mm height and a 40 degree angle. Use this page to confirm it matches the belt you are replacing.
The most reliable match is the marking on the belt you are removing. Read the full part number from the back of the belt and compare it against B 253. Then check the profile and the length: this belt is a B profile, 6451.6 mm long. If the old belt is worn or the marking is gone, measure the outside length and the top width before ordering.
Classical V-belts are commonly replaced as a set when a drive runs more than one belt. Confirm the number of belts on the drive and the sheave groove profile, and inspect the sheaves for wear, rust or buildup while the belts are off. A B profile belt will not sit correctly in a sheave cut for a different profile.
If the number on your belt does not match, send the part number you have, the profile, the length and the drive details. We can help confirm the right belt or suggest an equivalent.
Dimensions
- Section
- B
- Length
- 6451.6mm
Frequently asked questions
- How do I confirm the B 253 is the belt I need?
- Read the part number from the back of the belt you are replacing. If it is B 253, confirm the profile is B and the length is 6451.6 mm. If the belt is too worn to read, measure the outside length and top width.
- What are the dimensions of this belt?
- It has a B profile, a 6451.6 mm length, a 17 mm top width, an 11 mm height and a 40 degree angle.
- What should I send for a quote?
- Send the part number, the profile and the length, along with the drive details if you have them. If you are replacing a belt with a different number, include that number so we can help confirm the match.