V-belt Gates B 234

GATES B 234 belongs to v-belt, part of our Power transmission range. Tell us how many you need by WhatsApp or email and we'll get back to you promptly with a quote for B 234 and any equivalents.

The Gates B 234 is a classical V-belt in the Hi-Power II series. It has a B profile with a 17 mm top width, an 11 mm height, and a 40-degree angle, and it measures 5969 mm in length. Use these four values to confirm the belt matches the drive before you order.

The profile and length are the two dimensions that identify this belt. The B profile sets the cross-section: 17 mm across the top, 11 mm high, with a 40-degree angle. The 5969 mm length is the datum you match against the old belt or the drive specification. If either value differs, the belt will not seat or tension correctly.

For a direct replacement, read the marking on the back of the belt you are removing. The part number, profile and length should correspond to B 234, B, and 5969 mm. If the marking is worn or missing, measure the top width and the outside length and compare them with the figures above.

When you request a quote, send the part number B 234 along with the profile and length. If you are replacing more than one belt on the same drive, list every position so we can help you confirm each belt. We carry the Gates Hi-Power II line and can check the number you send.