V-belt Gates B 200
- Brand
- GATES
- Category
- Power transmission
- Subcategory
- V-belts
- Section
- B
- Series
- Hi-Power II
We reply promptly.
Tell us the quantity you need and request a quote by WhatsApp or email.
Other brands for this category
Ask us for alternatives. We check every equivalent against the part number and your application.
Can't find the exact model? Tell us the part number or model you need. We'll track it down and quote it, whether or not it appears in our catalog.
Description
GATES B 200 belongs to v-belt, part of our Power transmission range. Tell us how many you need by WhatsApp or email and we'll get back to you promptly with a quote for B 200 and any equivalents.
The Gates Hi-Power II B 200 is a classical V-belt with a B profile, a 5156.2 mm length, a 17 mm top width, an 11 mm height and a 40 degree angle. Before fitting it, inspect the drive and sheaves so the new belt runs correctly.
Check sheave grooves for wear, burrs, cracks or buildup that can damage a new belt. Confirm the sheaves are aligned and secure, and that the drive turns freely by hand. If a sheave is worn, the belt may slip or wear quickly even when the correct size is fitted.
Look at the old belt as you remove it. Note the profile and the length on the back, and compare them with the B 200. This belt is a classical V-belt in the B profile with a 5156.2 mm length. If the old marking is worn or missing, measure the drive and confirm the required profile and length before ordering.
On multi-belt drives, replace all belts in the set at the same time so they share the load evenly. The same size is also listed under Stark B 200. To request a quote, send the part number B 200, the brand Gates and the quantity you need by WhatsApp or email.
For help confirming the right belt, include the drive details and a photo of the old belt marking with your request. The team replies promptly and can help confirm the right belt or suggest an equivalent.
Dimensions
- Section
- B
- Length
- 5156.2mm
Frequently asked questions
- What is the profile and length of the Gates Hi-Power II B 200?
- It is a classical V-belt with a B profile and a 5156.2 mm length. The top width is 17 mm, the height is 11 mm and the angle is 40 degrees.
- What should I check on the drive before fitting this belt?
- Inspect sheave grooves for wear, burrs, cracks or buildup, confirm alignment and security, and make sure the drive turns freely. Worn sheaves can cause a new belt to slip or wear quickly.
- How do I request a quote for the B 200?
- Send the part number B 200, the brand Gates and the quantity you need by WhatsApp or email. The team replies promptly and can help confirm the right belt or suggest an equivalent.