V-belt Gates B 192
- Brand
- GATES
- Category
- Power transmission
- Subcategory
- V-belts
- Section
- B
- Series
- Hi-Power II
We reply promptly.
Tell us the quantity you need and request a quote by WhatsApp or email.
Other brands for this category
Ask us for alternatives. We check every equivalent against the part number and your application.
GATES and STARK: matching part numbers →GATES and MITSUBOSHI: matching part numbers →
Can't find the exact model? Tell us the part number or model you need. We'll track it down and quote it, whether or not it appears in our catalog.
Description
GATES B 192 belongs to v-belt, part of our Power transmission range. Tell us how many you need by WhatsApp or email and we'll get back to you promptly with a quote for B 192 and any equivalents.
The Gates Hi-Power II B 192 is a classical V-belt with a B profile and a length of 4953 mm. Before fitting a new belt, inspect the drive and sheaves for wear, alignment and damage that could shorten belt life.
Check sheave grooves for wear, cracks, or built-up debris. Misaligned sheaves or worn grooves can cause the belt to slip, flip, or wear quickly. Confirm that the sheave profile matches the B profile and that the belt sits correctly in the groove.
Verify that the new belt matches the old one: profile B, top width 17 mm, height 11 mm, angle 40 degrees, and length 4953 mm. The same size is also listed under Stark B 192 and Mitsuboshi B 192. If you need help confirming the right belt or an equivalent, send the part number and drive details by WhatsApp or email.
When replacing a belt on a multi-belt drive, replace all belts in the set at the same time to maintain even load sharing. After installation, check tension and re-tension after the initial run-in period.
Dimensions
- Section
- B
- Length
- 4953mm
Frequently asked questions
- What are the dimensions of the Gates Hi-Power II B 192?
- It has a B profile, a top width of 17 mm, a height of 11 mm, an angle of 40 degrees, and a length of 4953 mm.
- What should I check on the drive before installing this belt?
- Inspect sheave grooves for wear, cracks, or debris, and check alignment. Worn or misaligned sheaves can cause the belt to slip or wear prematurely.
- How do I request a quote for the Gates Hi-Power II B 192?
- Send the part number B 192 by WhatsApp or email. The team can confirm the belt and help with an equivalent if needed.