V-belt Gates B 139 PowerBand
- Brand
- GATES
- Category
- Power transmission
- Subcategory
- V-belts
- Section
- B
- Series
- Hi-Power PowerBand
We reply promptly.
Tell us the quantity you need and request a quote by WhatsApp or email.
Can't find the exact model? Tell us the part number or model you need. We'll track it down and quote it, whether or not it appears in our catalog.
Description
GATES B 139 PowerBand belongs to v-belt, part of our Power transmission range. Tell us how many you need by WhatsApp or email and we'll get back to you promptly with a quote for B 139 PowerBand and any equivalents.
The Gates B 139 PowerBand is a banded V-belt from the Hi-Power PowerBand series, with a length of 3531 mm. This page covers how to match it to the belt you are replacing so you can request a quote with confidence.
Start by reading the marking on the back of the old belt. Confirm the part number, the profile and the length. The B 139 PowerBand is a banded V-belt, so it ties multiple V-belts together with a common backing. If your drive uses a banded set, replace it with a banded belt of the same profile and length rather than individual V-belts.
The length is 3531 mm. When you request a quote, send the full part number and the length from the belt marking. If the marking is worn, measure the old belt and note the profile and the number of ribs in the band. We carry the Gates B 139 PowerBand and can help confirm it is the correct belt or suggest an equivalent.
Band length and profile must match the drive. A banded V-belt is used where several belts run side by side and must stay aligned. Check the pulleys and the band for wear before ordering, and replace the full set at the same time so the load is shared evenly.
Dimensions
- Length
- 3531mm
Frequently asked questions
- How do I confirm this belt matches the one I am replacing?
- Read the part number and length on the back of the old belt. The Gates B 139 PowerBand is a banded V-belt with a length of 3531 mm. Send us those details and a photo of the marking if it is readable.
- Can I replace a banded belt with single V-belts?
- A banded V-belt keeps the belts aligned and shares the load. Replacing it with individual belts can cause uneven tension and vibration. Use a banded belt of the same profile and length.
- What should I send to request a quote?
- Send the part number B 139 PowerBand, the length 3531 mm, and the quantity you need. If you are unsure of the profile or length, send the belt marking and we will help confirm the right belt or an equivalent.