V-belt Gates AX 97
- Brand
- GATES
- Category
- Power transmission
- Subcategory
- V-belts
- Section
- AX
- Series
- Tri-Power
We reply promptly.
Tell us the quantity you need and request a quote by WhatsApp or email.
Other brands for this category
Ask us for alternatives. We check every equivalent against the part number and your application.
GATES and OPTIBELT: matching part numbers →DAYCO and GATES: matching part numbers →
Can't find the exact model? Tell us the part number or model you need. We'll track it down and quote it, whether or not it appears in our catalog.
Description
GATES AX 97 belongs to v-belt, part of our Power transmission range. Tell us how many you need by WhatsApp or email and we'll get back to you promptly with a quote for AX 97 and any equivalents.
The Gates Tri-Power AX 97 is a cogged classical V-belt with an AX profile and a 2515 mm length. It is used on industrial drives where a classical cross-section is required and the pulley grooves match the AX profile. The cogged construction is typical for drives with small pulleys or backside idlers, where a standard wrapped belt may not flex as easily.
To confirm fit, check the old belt marking and match the profile and length. The AX profile identifies the cross-section, while 2515 mm is the datum length. If the drive uses multiple belts, replace the full set at the same time so the load stays evenly distributed. Inspect the pulleys for wear, alignment, and debris before installing the new belt.
The same size is also listed under Optibelt AX 97 and Dayco AX 97. If you need help confirming the right belt or want an equivalent, send the part number and a photo of the old belt marking by WhatsApp or email. The team replies promptly and can help you match the profile and length.
Dimensions
- Section
- AX
- Length
- 2515mm
Frequently asked questions
- How do I confirm the Gates Tri-Power AX 97 fits my drive?
- Check the marking on the old belt. It should show the AX profile and 2515 mm length. Also verify the pulley grooves accept an AX cross-section and that the drive uses a classical V-belt.
- Can I replace just one belt on a multi-belt drive?
- It is best to replace the full set. Belts wear and stretch together, so mixing a new belt with old ones can cause uneven load and vibration.
- What information should I send for a quote?
- Send the part number AX 97, the brand Gates, and the profile and length if known. A photo of the old belt marking helps confirm the correct replacement.