V-belt Gates AX 85
- Brand
- GATES
- Category
- Power transmission
- Subcategory
- V-belts
- Section
- AX
- Series
- Tri-Power
We reply promptly.
Tell us the quantity you need and request a quote by WhatsApp or email.
Other brands for this category
Ask us for alternatives. We check every equivalent against the part number and your application.
GATES and OPTIBELT: matching part numbers →DAYCO and GATES: matching part numbers →
Can't find the exact model? Tell us the part number or model you need. We'll track it down and quote it, whether or not it appears in our catalog.
Description
GATES AX 85 belongs to v-belt, part of our Power transmission range. Tell us how many you need by WhatsApp or email and we'll get back to you promptly with a quote for AX 85 and any equivalents.
This Gates Tri-Power belt is a cogged classical V-belt in the AX profile with a length of 2210 mm. Cogged classical V-belts are used on industrial drives where a standard classical profile is required and the cogged construction suits smaller pulleys. Confirm fit by the marking on the old belt and the drive's pulley groove.
The AX profile is a classical V-belt cross-section. Its cogged construction is common on drives with smaller pulley diameters. This belt is identified as Gates Tri-Power AX 85, with a length of 2210 mm. The same size is also listed under Optibelt AX 85 and Dayco AX 85.
To confirm the replacement, read the marking on the back of the old belt. Check that the profile is AX and the length is 2210 mm. Inspect the pulleys for wear and alignment before fitting a new belt. If the drive uses multiple belts, replace the full set so the load is shared evenly.
For a quote, send the part number AX 85 and the quantity you need. If the marking is worn, send the drive details and a photo of the belt and pulleys. The team can help confirm the right belt or suggest an equivalent.
Dimensions
- Section
- AX
- Length
- 2210mm
Frequently asked questions
- How do I confirm this belt fits my drive?
- Check the marking on the old belt for the AX profile and the 2210 mm length. Also check the pulley grooves and the drive layout. If you are unsure, send the drive details and a photo of the belt.
- Can I replace just one belt on a multi-belt drive?
- On a drive that uses several belts, replace the full set at the same time. Mixing a new belt with worn belts can cause uneven load sharing and vibration.
- What information do I need to send for a quote?
- Send the part number AX 85 and the quantity. If the belt marking is not clear, send the drive details and a photo of the belt and pulleys so the team can help confirm the right belt.