V-belt Gates AX 70
- Brand
- GATES
- Category
- Power transmission
- Subcategory
- V-belts
- Section
- AX
- Series
- Tri-Power
We reply promptly.
Tell us the quantity you need and request a quote by WhatsApp or email.
Other brands for this category
Ask us for alternatives. We check every equivalent against the part number and your application.
GATES and OPTIBELT: matching part numbers →DAYCO and GATES: matching part numbers →
Can't find the exact model? Tell us the part number or model you need. We'll track it down and quote it, whether or not it appears in our catalog.
Description
GATES AX 70 belongs to v-belt, part of our Power transmission range. Tell us how many you need by WhatsApp or email and we'll get back to you promptly with a quote for AX 70 and any equivalents.
The Gates Tri-Power AX 70 is a cogged classical V-belt in the AX profile with a length of 1829 mm. Before you fit it, take a few minutes to inspect the drive so the new belt is not damaged by a worn component.
Check the sheave grooves for wear, rust, burrs and embedded debris. A groove that has worn wide lets the belt sit too deep, so it slips and runs hot. Look for a step or ridge where the belt rides; that marks the wear limit. Clean the grooves and confirm the sheaves are aligned and secure on the shaft.
Inspect the rest of the drive as well: bearings for play or noise, mounting bolts for tightness, and any guard or tensioner for correct movement. On a multi-belt drive, replace all belts in the set so they share the load evenly. A single new belt beside stretched ones carries more than its share and fails early.
We carry the Gates Tri-Power AX 70, and the same size is also listed under Optibelt AX 70 and Dayco AX 70. Send the part number from the back of the old belt by WhatsApp or email and our team will confirm the right belt or suggest an equivalent.
Dimensions
- Section
- AX
- Length
- 1829mm
Frequently asked questions
- What are the profile and length of this belt?
- It is an AX profile cogged classical V-belt with a length of 1829 mm.
- What should I check on the drive before fitting it?
- Inspect the sheave grooves for wear, rust, burrs and debris, check alignment and shaft security, and look at bearings, mounting bolts and the tensioner. On a multi-belt drive, fit a full set.
- How do I request a quote?
- Send the part number, AX 70, by WhatsApp or email. Our team replies promptly and can help confirm the right belt or suggest an equivalent.