V-belt Gates AX 100
- Brand
- GATES
- Category
- Power transmission
- Subcategory
- V-belts
- Section
- AX
- Series
- Tri-Power
We reply promptly.
Tell us the quantity you need and request a quote by WhatsApp or email.
Other brands for this category
Ask us for alternatives. We check every equivalent against the part number and your application.
Can't find the exact model? Tell us the part number or model you need. We'll track it down and quote it, whether or not it appears in our catalog.
Description
GATES AX 100 belongs to v-belt, part of our Power transmission range. Tell us how many you need by WhatsApp or email and we'll get back to you promptly with a quote for AX 100 and any equivalents.
The Gates Tri-Power AX 100 is a cogged classical V-belt with an AX profile and a length of 2591 mm. This page is set up for maintenance and purchasing teams who need to match a belt that is already on the drive. The most reliable way to match it is to read the old belt's marking and confirm the profile and length.
When you have the old belt in hand, check the back of the belt for the profile and length. The AX profile and 2591 mm length are the two values that identify this belt. If the existing belt is worn or the marking is gone, measure the outside length and compare it to 2591 mm. The same size is also listed under Optibelt AX 100, so you can note that as an alternative brand reference.
Cogged classical V-belts are used on drives where the belt bends over small pulleys. Before installing a replacement, inspect the pulleys for wear, alignment, and debris. A worn pulley groove can quickly damage a new belt. If the drive uses multiple belts, replace them as a set so the load is shared evenly.
Dimensions
- Section
- AX
- Length
- 2591mm
Frequently asked questions
- How do I confirm this is the right belt for my drive?
- Read the marking on the back of the belt you are replacing. You need the profile to be AX and the length to be 2591 mm. If the marking is unreadable, measure the outside length and compare it to 2591 mm.
- Can I use this belt if the old one is a different brand?
- Yes, if the profile and length match. The same size is also listed under Optibelt AX 100. Always confirm the profile and length before ordering.
- What information should I send for a quote?
- Send the part number AX 100 and the brand Gates, along with the profile AX and length 2591 mm. If you are unsure, send a photo of the belt marking and the pulley dimensions.