V-belt Gates A 29
- Brand
- GATES
- Category
- Power transmission
- Subcategory
- V-belts
- Section
- A
- Series
- Hi-Power II
We reply promptly.
Tell us the quantity you need and request a quote by WhatsApp or email.
Other brands for this category
Ask us for alternatives. We check every equivalent against the part number and your application.
DODGE and GATES: matching part numbers →GATES and STARK: matching part numbers →GATES and OPTIBELT: matching part numbers →
Can't find the exact model? Tell us the part number or model you need. We'll track it down and quote it, whether or not it appears in our catalog.
Description
GATES A 29 belongs to v-belt, part of our Power transmission range. Tell us how many you need by WhatsApp or email and we'll get back to you promptly with a quote for A 29 and any equivalents.
The Gates Hi-Power II A 29 is a classical V-belt with an A profile. It measures 787.4 mm in length, 13 mm across the top, 8 mm in height, and has a 40° angle. Before fitting this belt, inspect the drive and sheaves for wear, alignment, and groove condition.
Worn sheaves can ruin a new belt quickly. Check groove sides for step wear, verify sheave alignment with a straightedge, and confirm the sheave grooves match the A profile. Look for oil, debris, or rust in the grooves and correct any issues before installation.
The A 29 belt has a 787.4 mm length and a 13 mm top width. When replacing, compare the old belt marking to the new one and confirm the profile and length match. If the old belt is unreadable, measure the top width and outside length to identify the correct size.
The same size is also listed under Stark A 29 and Optibelt A 29. To request a quote, send the part number, quantity, and any drive details by WhatsApp or email. The team can help confirm the right belt for your application.
Dimensions
- Section
- A
- Length
- 787.4mm
Frequently asked questions
- What should I check on the drive before installing this belt?
- Inspect sheave grooves for wear, check alignment, and clean any oil or debris. Confirm the sheaves are correct for an A profile belt.
- How do I confirm the A 29 is the right size?
- Compare the marking on the old belt. The A 29 has a 787.4 mm length and a 13 mm top width. If the old belt is unreadable, measure these dimensions.
- What information do you need for a quote?
- Send the part number A 29, the quantity, and any drive details by WhatsApp or email. The team will reply promptly.