V-belt Gates A 117
- Brand
- GATES
- Category
- Power transmission
- Subcategory
- V-belts
- Section
- A
- Series
- Hi-Power II
We reply promptly.
Tell us the quantity you need and request a quote by WhatsApp or email.
Can't find the exact model? Tell us the part number or model you need. We'll track it down and quote it, whether or not it appears in our catalog.
Description
GATES A 117 belongs to v-belt, part of our Power transmission range. Tell us how many you need by WhatsApp or email and we'll get back to you promptly with a quote for A 117 and any equivalents.
The Gates Hi-Power II A 117 is a classical V-belt with an A profile and a length of 3022.6 mm. When you need to replace a belt on a drive, this page gives you the dimensions to match against the belt you are removing.
Start with the belt currently on the drive. Read the marking on the back: the part number, the profile and the length are the fastest way to confirm what you need. This belt is profile A, with a top width of 13 mm, a height of 8 mm and a 40-degree angle. Its length is 3022.6 mm. Compare those figures with the old belt before you order.
If the marking is worn off, measure the old belt. Check the top width and the outside length, and note the profile. A profile A belt is a classical V-belt, so it seats in a standard A groove. The 40-degree angle is the included angle of the belt cross-section. If the drive uses more than one belt, inspect all of them and note the quantity.
Send the part number A 117, the profile and the length to our team by WhatsApp or email. If you are unsure whether this is the correct belt, include the drive details and a photo of the old belt. We carry Gates belts and can help confirm the right belt or suggest an equivalent.
Dimensions
- Section
- A
- Length
- 3022.6mm
Frequently asked questions
- How do I match the Gates Hi-Power II A 117 to the belt I am replacing?
- Check the marking on the back of the old belt for the part number, profile and length. This belt is profile A with a length of 3022.6 mm, a top width of 13 mm, a height of 8 mm and a 40-degree angle. If the marking is unreadable, measure the old belt and compare.
- What should I send to request a quote for this belt?
- Send the part number A 117, the profile and the length. If you are replacing a belt on a specific drive, include the drive details and a photo of the old belt so we can help confirm the match.
- Can you help if I am not sure this is the right belt?
- Yes. Send the details of the belt you are replacing and the drive it runs on. We carry Gates belts and can help confirm the right belt or suggest an equivalent.