V-belt Gates 8VP2650
- Brand
- GATES
- Category
- Power transmission
- Subcategory
- V-belts
We reply promptly.
Tell us the quantity you need and request a quote by WhatsApp or email.
Can't find the exact model? Tell us the part number or model you need. We'll track it down and quote it, whether or not it appears in our catalog.
Description
GATES 8VP2650 belongs to v-belt, part of our Power transmission range. Tell us how many you need by WhatsApp or email and we'll get back to you promptly with a quote for 8VP2650 and any equivalents.
The Gates 8VP V-belt is a power transmission belt used to drive pulleys in industrial machinery. It suits equipment that runs continuously and demands high drive capacity, such as mills, pumps, fans and compressors. The V-profile seats in the pulley grooves to maintain speed and limit slippage.
The part number tells you the main dimensions. The first figure is the number of ribs or grooves, the letters VP identify the profile, and the final digits give the outside length in inches. So 8VP1600 is an 8-groove belt with a 1600-inch outside length, while 8VP2000 is an 8-groove belt at 2000 inches. Suffixes can point to construction variants, including reinforcements or special compounds, so always check the complete part number.
Typical applications include grinding equipment, forced ventilation, centrifugal pumps and screw compressors. These belts also appear in water treatment plants and in low-speed, high-torque drives where smooth, quiet running matters.
Selection depends on the power to be transmitted, the speed of the faster pulley, the center distance and the pulley type. Check pulley alignment and tension: too much tension speeds up bearing wear, while too little causes slippage and heat. Belts are not lubricated, but keep them clear of oil and grease.
When you replace a belt, you may come across equivalent part numbers from other brands. Interchangeability is based on profile and outside length, so if you send us the part number you use, we can identify the corresponding Gates 8VP belt. Replacing all belts in a set at the same time helps avoid uneven wear.
To request a quote for a Gates 8VP V-belt, send the part number or size by WhatsApp or email. The team can also suggest equivalents and help you choose the right belt for the drive.
Dimensions
- Número de producto
- 9189-00265
Frequently asked questions
- What does the designation 8VP1600 mean?
- The 8 is the number of grooves, VP is the high-capacity V-profile, and 1600 is the outside length in inches. This lets you identify the main dimensions from the part number.
- How can I tell if a belt from another brand is compatible?
- Compatibility is set by the profile and outside length. Send us the part number of the belt you use and we will tell you the equivalent in the Gates 8VP line. A photo of the belt and pulley also helps.
- How often should belts be replaced?
- There is no fixed interval; it depends on operating hours, load and environmental conditions. Inspect periodically and replace when you see wear, cracks or loss of tension. Replace the whole set at once.