V-belt Gates 7M 730
- Brand
- GATES
- Category
- Power transmission
- Subcategory
- V-belts
- Series
- Polyflex
We reply promptly.
Tell us the quantity you need and request a quote by WhatsApp or email.
Can't find the exact model? Tell us the part number or model you need. We'll track it down and quote it, whether or not it appears in our catalog.
Description
GATES 7M 730 belongs to v-belt, part of our Power transmission range. Tell us how many you need by WhatsApp or email and we'll get back to you promptly with a quote for 7M 730 and any equivalents.
The Gates Polyflex 7M 730 is a Polyflex narrow V-belt with a 730 mm length. The 7M profile and the 730 mm length are the two figures you need to match a drive position. This page covers what those numbers tell you before you request a quote.
The profile sets how the belt sits in the pulley groove. The 7M profile belongs to the Polyflex narrow V-belt family, so it is a narrow cross-section rather than a classic wrapped V-belt. The length, 730 mm, is the figure that has to line up with the drive layout. When you read a belt marking, the profile and the length are the two values to record first.
For a replacement, read the marking on the back of the old belt and compare it with the part number you are ordering. If the old belt is worn or the marking is unreadable, measure the length and identify the profile from the pulley groove. Send the part number, the profile and the 730 mm length so the belt can be confirmed against the drive.
On multi-belt drives, replace the belts as a set so the load stays even across the grooves. Check the pulleys for wear, alignment and groove condition while the belts are off, since a worn groove will shorten the life of a new belt. If you need help confirming this belt or a similar one, send the part number and the drive details.
Dimensions
- Length
- 730mm
Frequently asked questions
- What do the 7M profile and the 730 mm length mean for my drive?
- The 7M profile is the narrow V-belt cross-section that fits the pulley groove. The 730 mm length is the belt length. Both need to match the drive position you are replacing.
- How do I confirm this is the right belt?
- Read the marking on the back of the old belt and compare the profile and length. If the marking is gone, measure the length and check the pulley groove for the profile, then send those details with the part number.
- How do I request a quote for the Gates Polyflex 7M 730?
- Send the part number 7M 730 by WhatsApp or email. Include the drive details and the quantity so the belt can be confirmed and quoted.