V-belt Gates 7M 580
- Brand
- GATES
- Category
- Power transmission
- Subcategory
- V-belts
- Series
- Polyflex
We reply promptly.
Tell us the quantity you need and request a quote by WhatsApp or email.
Can't find the exact model? Tell us the part number or model you need. We'll track it down and quote it, whether or not it appears in our catalog.
Description
GATES 7M 580 belongs to v-belt, part of our Power transmission range. Tell us how many you need by WhatsApp or email and we'll get back to you promptly with a quote for 7M 580 and any equivalents.
The Gates Polyflex 7M 580 is a narrow V-belt built for compact, high-speed drive systems where space is tight. Its 7M profile and 580 mm length make it a direct replacement when the original belt carries the same markings. Use this page to confirm that the belt on your drive matches before you request a quote.
Polyflex narrow V-belts are commonly found on small industrial equipment, precision machine tools, and auxiliary drives that run at higher speeds. The 7M profile indicates a specific cross-section, while the 580 mm length is the datum length you will find printed on the back of the belt. Both values must match the belt you are replacing.
To confirm fit, read the marking on the old belt. You are looking for the profile (7M) and the length (580 mm). If the old belt is worn or the marking is unreadable, measure the outside circumference and compare it to the length listed here. Also check the pulley grooves for wear and alignment, since a worn groove can make a new belt run incorrectly.
When you request a quote, send the part number 7M 580 along with the quantity and any details from the old belt. If you are unsure whether this is the correct belt for your drive, our team can help confirm the right belt or suggest an equivalent based on the profile and length you provide.
Dimensions
- Length
- 580mm
Frequently asked questions
- How do I confirm that the Gates Polyflex 7M 580 fits my drive?
- Check the marking on your old belt. It should show the 7M profile and 580 mm length. If the marking is missing, measure the outside circumference and compare it to 580 mm. Also inspect the pulley grooves for wear.
- What should I send to get a quote for this belt?
- Send the part number 7M 580, the quantity you need, and any photos or details from the old belt. If you are unsure about the profile or length, include those measurements so we can help confirm the right belt.
- Can I replace just one belt on a multi-belt drive?
- On drives that use multiple belts, it is common practice to replace all belts in the set at the same time. Mixing new and worn belts can cause uneven tension and premature wear. Confirm the number of belts on your drive before ordering.