V-belt Gates 7M 1060 JB
- Brand
- GATES
- Category
- Power transmission
- Subcategory
- V-belts
- Series
- Polyflex JB
We reply promptly.
Tell us the quantity you need and request a quote by WhatsApp or email.
Can't find the exact model? Tell us the part number or model you need. We'll track it down and quote it, whether or not it appears in our catalog.
Description
GATES 7M 1060 JB belongs to v-belt, part of our Power transmission range. Tell us how many you need by WhatsApp or email and we'll get back to you promptly with a quote for 7M 1060 JB and any equivalents.
This is a Gates Polyflex JB narrow V-belt with the part number 7M 1060 JB. Its profile identifies it as a 7M section belt, and the length is 1053 mm. Use these two values to match the belt to your drive before you request a quote.
The 7M profile is the first thing to confirm. A 7M section belt runs in a matching 7M pulley groove, so the profile must match the drive's sheave. The second value is the length: 1053 mm. Compare it directly with the length marked on the belt you are replacing. If both the profile and the length match, the belt is the correct size for that position.
The part number 7M 1060 JB is the reference to quote. The marking on the back of the belt is the most reliable source, so read it before ordering. If the old belt is worn or the marking is gone, measure the length and note the profile instead. Send the part number, or the profile and length, by WhatsApp or email and the team will reply promptly to confirm the right belt or suggest an equivalent.
On drives with more than one belt, replace the full set at the same time. Mixed belts of different wear can sit at different tensions, which affects how the drive runs. Inspect the pulleys for wear or damage while the belts are off, and check that the new belt sits correctly in the groove.
Dimensions
- Length
- 1053mm
Frequently asked questions
- What do the profile and length tell me about this belt?
- The 7M profile tells you which pulley groove the belt fits. The length of 1053 mm tells you the belt's size around the drive. Both must match the belt you are replacing.
- How do I confirm this is the right belt for my drive?
- Read the marking on the back of the old belt. If it shows 7M 1060 JB, quote that part number. If the marking is unreadable, note the 7M profile and the 1053 mm length.
- What should I send to request a quote?
- Send the part number 7M 1060 JB, or the profile and length, by WhatsApp or email. The team replies promptly and can help confirm the right belt or suggest an equivalent.