V-belt Gates 5VX 1400 PowerBand
- Brand
- GATES
- Category
- Power transmission
- Subcategory
- V-belts
- Section
- 5VX
- Series
- Quad-Power 4 PowerBand
We reply promptly.
Tell us the quantity you need and request a quote by WhatsApp or email.
Can't find the exact model? Tell us the part number or model you need. We'll track it down and quote it, whether or not it appears in our catalog.
Description
GATES 5VX 1400 PowerBand belongs to v-belt, part of our Power transmission range. Tell us how many you need by WhatsApp or email and we'll get back to you promptly with a quote for 5VX 1400 PowerBand and any equivalents.
This is a Gates 5VX 1400 PowerBand belt from the Quad-Power 4 PowerBand series, a banded V-belt with a length of 3555 mm. Banded V-belts are used on multi-groove drives where several V-belts run side by side and must stay aligned, such as high-load industrial drives that would otherwise need matched sets. Confirm fit by matching the part number and length to the belt you are replacing.
The banded construction ties the individual V-belts together, which helps keep them from flipping or jumping out of the pulley grooves on drives with pulsating or shock loads. If your drive currently uses several separate V-belts and you are constantly re-tensioning or replacing them one at a time, a banded belt is the usual upgrade.
To confirm this belt fits, read the marking on the back of the old belt and compare it to 5VX 1400 PowerBand. Check the length against the 3555 mm figure in the data. Also inspect the pulley grooves for wear, and make sure the sheave groove profile matches the belt cross-section before ordering.
If the marking is worn off, measure the outside length of the old belt and count the number of ribs or grooves in the drive. Send those details along with your equipment information and our team can help identify the correct belt or suggest an equivalent.
Dimensions
- Length
- 3555mm
Frequently asked questions
- How do I confirm this Gates 5VX 1400 PowerBand belt will fit my drive?
- Check the part number and the 3555 mm length against the belt you are replacing. If the old belt is unreadable, measure its outside length and count the pulley grooves, then send those details with your quote request.
- What is a banded V-belt used for?
- Banded V-belts are used on drives that require multiple V-belts to run together. The band holds the belts at a fixed spacing, which helps prevent individual belts from turning over or coming off the pulleys under shock or pulsating loads.
- Can you help if I cannot find the part number on my old belt?
- Yes. Send the belt length, the number of grooves in the drive, and any equipment details you have. Our team will review the information and help confirm the right belt or suggest an equivalent.