V-belt Gates 5V 1000 PowerBand
- Brand
- GATES
- Category
- Power transmission
- Subcategory
- V-belts
- Section
- 5V
- Series
- Super HC PowerBand
We reply promptly.
Tell us the quantity you need and request a quote by WhatsApp or email.
Can't find the exact model? Tell us the part number or model you need. We'll track it down and quote it, whether or not it appears in our catalog.
Description
GATES 5V 1000 PowerBand belongs to v-belt, part of our Power transmission range. Tell us how many you need by WhatsApp or email and we'll get back to you promptly with a quote for 5V 1000 PowerBand and any equivalents.
This Gates 5V 1000 PowerBand is a banded V-belt in the Super HC PowerBand series, with a 2540 mm length. Banded construction ties multiple V-belt strands together so they run as one unit on multi-groove drives. Use it where you need to keep belts from flipping or whipping on high-ratio, pulsating loads.
Banded V-belts are common on drives with several grooves that must stay in sync, such as pumps, fans, compressors and other process equipment. The band holds the strands in alignment, which helps on drives with shock loads or where a single belt might turn over in the groove. This belt is a 5V profile with a 2540 mm length, so confirm both the cross-section and the length against your existing belt or drive drawing.
The most reliable way to confirm fit is to read the marking on the back of the old belt and match it to the part number. If the marking is worn, measure the profile and the length, then compare them to the 5V profile and 2540 mm length listed here. Because this is a banded belt, also count the number of ribs or strands in the band and check that the drive sheaves have the matching number of grooves.
When you request a quote, send the part number, the quantity, and the application so we can confirm the belt or suggest an equivalent. If you are replacing a set, include the full set details so the replacement belts are matched.
Dimensions
- Length
- 2540mm
Frequently asked questions
- How do I confirm this belt fits my drive?
- Check the marking on the old belt and match it to the part number. You can also verify the 5V profile and the 2540 mm length against your drive data, and count the strands in the band to match the number of grooves on the sheaves.
- Can I replace just one belt on a banded drive?
- Banded belts are designed to run as a set. For best results, replace the full set so all strands carry the load evenly. Send us the set details with your quote request.
- What information do you need for a quote?
- Send the part number, the quantity, and a note about the drive or application. If you are unsure of the exact belt, include the old belt marking or the drive details and we will help confirm the right belt or an equivalent.