V-belt Gates 5M 487
- Brand
- GATES
- Category
- Power transmission
- Subcategory
- V-belts
- Series
- Polyflex
We reply promptly.
Tell us the quantity you need and request a quote by WhatsApp or email.
Can't find the exact model? Tell us the part number or model you need. We'll track it down and quote it, whether or not it appears in our catalog.
Description
GATES 5M 487 belongs to v-belt, part of our Power transmission range. Tell us how many you need by WhatsApp or email and we'll get back to you promptly with a quote for 5M 487 and any equivalents.
When replacing a Gates Polyflex 5M 487 narrow V-belt, the most reliable method is to read the marking on the back of the belt you are removing. That marking confirms the profile and length before you request a quote. This page covers what to check and how to send your request.
The Gates Polyflex 5M 487 is a narrow V-belt with a 487 mm length. To match it correctly, locate the existing belt on the drive and wipe the back clean. Look for the part number and length printed or embossed on the belt. If the marking is worn or unreadable, measure the outside length and note the cross-section, then send those details with your request.
A common mistake is ordering by length alone. The 5M profile and the 487 mm length must both match the drive. If the old belt is cracked, glazed, or shows exposed cords, replace it before it fails. On multi-belt drives, replace all belts in the set at the same time to keep tension even and avoid mismatched wear.
To request a quote, send the part number 5M 487, the brand Gates, and the quantity you need. If you are unsure, include a photo of the belt marking or the drive. Our team replies promptly by WhatsApp or email and can help confirm the right belt or suggest an equivalent.
Dimensions
- Length
- 487mm
Frequently asked questions
- How do I confirm the belt I need is the Gates Polyflex 5M 487?
- Check the marking on the back of the belt you are replacing. It should show the profile and length. If it reads 5M 487, that is the belt to request. If the marking is missing, measure the outside length and note the cross-section.
- Can I use a different length if the 5M 487 is not marked?
- No. Both the 5M profile and the 487 mm length must match the drive. Using a different length will change tension and alignment, which can cause premature failure.
- What information should I send with my quote request?
- Send the part number 5M 487, the brand Gates, and the quantity. If you have any doubt, include a photo of the belt marking or the drive. We will confirm the belt or suggest an equivalent.