Timing belt Gates 4326-14MX
- Brand
- GATES
- Category
- Power transmission
- Subcategory
- Timing belts
- Series
- PowerGrip GTX
We reply promptly.
Tell us the quantity you need and request a quote by WhatsApp or email.
Can't find the exact model? Tell us the part number or model you need. We'll track it down and quote it, whether or not it appears in our catalog.
Description
GATES 4326-14MX belongs to timing belt, part of our Power transmission range. Tell us how many you need by WhatsApp or email and we'll get back to you promptly with a quote for 4326-14MX and any equivalents.
The Gates PowerGrip GTX 4326-14MX is a synchronous belt with a 14MX profile and a 4326 mm length. It is used on drives where the belt teeth mesh with matching pulleys to keep the driven shaft in step with the driver. Confirm fit by comparing the profile, the length and the part number on the belt you are replacing.
Timing belts of this type turn up on industrial drives rather than on engines: process equipment, pumps, compressors, conveyors, machine tools and similar machinery where shaft synchronization matters. The 14MX profile tells you the tooth form and pitch the pulleys must match. The 4326 mm length is the datum for the drive center distance, so a belt of the same profile but a different length will not fit the same layout.
The most reliable check is the marking on the back of the belt you are removing. Read the profile and the part number, then compare them with the pulleys: tooth form, number of grooves and width all have to agree. If the old belt is worn, damaged or unreadable, measure the drive and count pulley teeth so the replacement can be matched correctly.
When you request a quote, send the part number 4326-14MX, the belt marking, and a photo of the back of the belt and the pulleys if you have one. Our team replies by WhatsApp or email and can confirm the belt or suggest an equivalent.
Dimensions
- Profile
- 14MX
- Pitch
- 14mm
- Length
- 4326mm
Frequently asked questions
- How do I confirm this belt fits my drive?
- Check the profile against the pulleys and the length against the drive layout, then compare the part number with the marking on the belt you are replacing. The 14MX profile and 4326 mm length both have to match.
- What should I send for a quote?
- Send the part number 4326-14MX, the marking from the back of the belt, and a photo of the belt and pulleys if possible. We reply by WhatsApp or email.
- Can you help if the old belt marking is worn off?
- Yes. Measure the drive and note the pulley tooth form and count, and send those details with the part number. We can then confirm the belt or suggest an equivalent.