Skip to main content
All products
Gates Quad-Power 4 PowerBand banded V-belt · GATES 3VX 900 PowerBand
V-belt Gates 3VX 900 PowerBand

GATESBrand We Carry

V-belt Gates 3VX 900 PowerBand

Manufacturer part number3VX 900 PowerBandAlso known as: 3VX900PowerBand · 3VX 900-PowerBand
Brand
GATES
Subcategory
V-belts
Section
3VX
Series
Quad-Power 4 PowerBand
Get a quote for 3VX 900 PowerBand on WhatsApp

We reply promptly.

Tell us the quantity you need and request a quote by WhatsApp or email.

Can't find the exact model? Tell us the part number or model you need. We'll track it down and quote it, whether or not it appears in our catalog.

Ask on WhatsAppAsk by email

Description

GATES 3VX 900 PowerBand belongs to v-belt, part of our Power transmission range. Tell us how many you need by WhatsApp or email and we'll get back to you promptly with a quote for 3VX 900 PowerBand and any equivalents.

This is a Gates 3VX 900 PowerBand banded V-belt from the Quad-Power 4 PowerBand series, with a length of 2285 mm. Banded V-belts are commonly used where multiple V-belts run side by side on the same sheave set and must stay aligned under load. The joined construction keeps the ribs from turning over or whipping in high-ratio drives.

To confirm fit, read the marking on the back of the old belt and match the part number, series and 2285 mm length. Check the sheave groove profile and the number of ribs in the drive against the belt you remove. If the old belt is worn or unreadable, measure the outside length and count the ribs before ordering.

Inspect the drive while the belt is off: look for worn sheave grooves, misalignment between shafts, and any debris or oil that can shorten belt life. On banded drives, replace the full set at once so all ribs share the load evenly. Send the part number 3VX 900 PowerBand by WhatsApp or email and we will confirm the belt or suggest an equivalent.

Dimensions

Length
2285mm

Frequently asked questions

How do I confirm this banded V-belt fits my drive?
Match the part number 3VX 900 PowerBand, the Quad-Power 4 PowerBand series and the 2285 mm length to the marking on your old belt. Also verify the sheave groove profile and the number of ribs in the drive.
Can I replace only one rib of a banded belt?
No. A banded V-belt is a joined set of ribs, so the whole belt is replaced as one unit. If the drive uses more than one belt, replace all belts at the same time.
What should I send to get a quote?
Send the part number 3VX 900 PowerBand, the quantity, and the marking from the old belt if you have it. We reply by WhatsApp or email and can help confirm the right belt or suggest an equivalent.
Get a quote for 3VX 900 PowerBand on WhatsApp
Quote on WhatsApp