V-belt Gates 3VX 250 PowerBand
- Brand
- GATES
- Category
- Power transmission
- Subcategory
- V-belts
- Section
- 3VX
- Series
- Quad-Power 4 PowerBand
We reply promptly.
Tell us the quantity you need and request a quote by WhatsApp or email.
Can't find the exact model? Tell us the part number or model you need. We'll track it down and quote it, whether or not it appears in our catalog.
Description
GATES 3VX 250 PowerBand belongs to v-belt, part of our Power transmission range. Tell us how many you need by WhatsApp or email and we'll get back to you promptly with a quote for 3VX 250 PowerBand and any equivalents.
This is a Gates 3VX 250 PowerBand belt from the Quad-Power 4 series, a banded V-belt with a 635 mm length. Banded construction ties multiple V-belts together so they run as one unit, which is common on drives where single belts tend to flip, whip or wear unevenly. It is ordered by part number, and the profile and length above are what you match against the drive.
Banded V-belts are used on multi-groove drives that must stay in step, such as those found on industrial machinery where pulsating or shock loads are present. Because the belts are joined, they cannot roll into the sheave grooves at different rates. Confirm fit by checking that the drive takes a 3VX profile and that the belt's 635 mm length matches the original. The 3VX profile is a narrow cross-section, so the sheave grooves must be cut for it.
If you are replacing an existing belt, read the marking on the back. The part number, profile and length are printed there, and the Gates 3VX 250 PowerBand name confirms the series and construction. Measure the old belt only if the marking is gone, and replace banded belts as a complete set rather than mixing new and worn belts on the same drive. Send the part number by WhatsApp or email and we will confirm it or suggest an equivalent.
Dimensions
- Length
- 635mm
Frequently asked questions
- How do I confirm this belt fits my drive?
- Check the drive sheaves for a 3VX groove profile and confirm the required belt length is 635 mm. The part number on the back of the old belt is the most reliable reference.
- Can I replace just one belt on a banded drive?
- No. Banded V-belts are joined as a set, so the whole belt is replaced at once. Mixing a new banded belt with worn belts on the same drive can cause uneven loading.
- What information do I need to request a quote?
- Send the part number, 3VX 250 PowerBand, along with the quantity you need. If you are unsure of the number, send the marking from the old belt and we will help confirm it.