V-belt Gates 3M 730
- Brand
- GATES
- Category
- Power transmission
- Subcategory
- V-belts
- Series
- Polyflex
We reply promptly.
Tell us the quantity you need and request a quote by WhatsApp or email.
Can't find the exact model? Tell us the part number or model you need. We'll track it down and quote it, whether or not it appears in our catalog.
Description
GATES 3M 730 belongs to v-belt, part of our Power transmission range. Tell us how many you need by WhatsApp or email and we'll get back to you promptly with a quote for 3M 730 and any equivalents.
When replacing a Gates Polyflex 3M 730, the most reliable approach is to compare the belt you are removing to the specification you are ordering. This page covers what to check on the old belt and what to send so the replacement matches.
Start with the marking on the back of the belt. The Gates Polyflex 3M 730 is a Polyflex narrow V-belt with a 730 mm length. If the old belt still shows its part number, confirm it matches 3M 730 exactly. If the marking is worn or unreadable, measure the outside length and note the profile.
Profile and length are the two values that matter most here. The 3M profile identifies the cross-section family, and 730 mm is the datum length. A belt with the same profile but a different length will not sit correctly in the drive, so both figures need to agree with the old belt before you order.
Once you have the profile and length, send the part number 3M 730 by WhatsApp or email. If anything about the old belt is unclear, include a photo of the back marking or the measured length. The team can confirm the belt or suggest an equivalent from what we carry.
Dimensions
- Length
- 730mm
Frequently asked questions
- How do I confirm the Gates Polyflex 3M 730 is the right replacement?
- Check the marking on the back of the old belt for 3M 730, or measure the length and compare it to 730 mm. The profile should also match the 3M narrow V-belt cross-section.
- What should I send to request a quote for this belt?
- Send the part number 3M 730 by WhatsApp or email. If the old belt is unmarked, include the measured length and a photo of the belt so the team can confirm the match.
- Can I use a different length if the 3M profile is the same?
- No. The 730 mm length is specific to this belt. A different length in the same profile will not fit the drive correctly, so both the profile and the length need to match.