V-belt Gates 3M 560 JB
- Brand
- GATES
- Category
- Power transmission
- Subcategory
- V-belts
- Series
- Polyflex JB
We reply promptly.
Tell us the quantity you need and request a quote by WhatsApp or email.
Can't find the exact model? Tell us the part number or model you need. We'll track it down and quote it, whether or not it appears in our catalog.
Description
GATES 3M 560 JB belongs to v-belt, part of our Power transmission range. Tell us how many you need by WhatsApp or email and we'll get back to you promptly with a quote for 3M 560 JB and any equivalents.
The Gates Polyflex JB 3M 560 JB is a Polyflex narrow V-belt with a 560 mm length. Use this page to match the belt currently on your drive before you request a quote.
Matching starts with the belt in hand. Read the marking on the back of the old belt and confirm the profile and the length. The Polyflex JB profile and the 560 mm length identify this belt. If the old marking is worn or unreadable, measure the belt and note the profile and length so the replacement can be checked against the same figures.
Polyflex JB belts are used in compact, high-speed drives where a narrow profile is needed. When you replace one, inspect the pulleys for wear and alignment, and check the drive for any condition that may have caused the original belt to fail. If the drive runs more than one belt, replace the full set so the load stays even across the belts.
To request a quote, send the part number 3M 560 JB, or the profile and length you read from the old belt. If the marking is gone, send a photo of the belt and the drive so we can help confirm the right belt or suggest an equivalent.
Dimensions
- Length
- 560mm
Frequently asked questions
- How do I confirm this is the belt I need?
- Read the marking on the back of the belt you are replacing. If it shows the Polyflex JB profile and a 560 mm length, this is the matching belt. If the marking is not clear, measure the belt and send the profile and length.
- What should I send with my quote request?
- Send the part number 3M 560 JB, or the profile and length from the old belt. A photo of the belt and the drive also helps us confirm the right belt or suggest an equivalent.
- Should I replace more than one belt at a time?
- If the drive uses a set of belts, replace all of them together. Mixing a new belt with worn belts can cause uneven loading and shorten belt life.