Timing belt Gates 2976-MXL
- Brand
- GATES
- Category
- Power transmission
- Subcategory
- Timing belts
We reply promptly.
Tell us the quantity you need and request a quote by WhatsApp or email.
Can't find the exact model? Tell us the part number or model you need. We'll track it down and quote it, whether or not it appears in our catalog.
Description
GATES 2976-MXL belongs to timing belt, part of our Power transmission range. Tell us how many you need by WhatsApp or email and we'll get back to you promptly with a quote for 2976-MXL and any equivalents.
A Gates MXL timing belt is a toothed power transmission element that runs on matching toothed pulleys, so the drive keeps a fixed ratio with no slip. Printers, measuring instruments, sewing equipment and light automation are typical homes for this profile, where timing has to stay precise. MR Industrial Accessories LLC supplies it to customers throughout the United States and in Latin America, and quotes by part number over WhatsApp or email.
Reading the code is the fastest way to confirm a replacement. The digits ahead of the MXL suffix give the pitch length in hundredths of an inch, so 288-MXL measures 288 and 320-MXL measures 320. MXL itself is the minimum-pitch tooth profile, nominal pitch 0.08 in (2.032 mm), intended for pulleys of small diameter. With that convention you can size a belt from the marking instead of measuring it.
Typical duties are light, fast and space-constrained: 3D printers, plotters, industrial sewing machines, lab instruments, stepper-motor positioning axes and similar mechanisms. The MXL tooth form suits low-power, high-speed drives where a V-belt would not hold the accuracy the application needs. Household appliances and precision machine tools also use this profile.
Selection comes down to pulley tooth count, center distance and transmitted power. The pulleys must match the MXL profile, and tension should be firm rather than excessive, since over-tensioning wears both teeth and bearings. Align the pulleys carefully so the belt stays seated. No lubrication is needed; keep the belt clean and clear of oils and greases that attack the elastomer.
Belts of this profile from different manufacturers can be swapped when profile and pitch length agree, so compare the complete part number before ordering. If the marking is gone, a photo of the old belt or its measurements and tooth count is usually enough for our team to identify it and propose an equivalent. Send the part number by WhatsApp or email and we will reply promptly with a quote and selection help.
Dimensions
- Número de producto
- 9254-40295
Frequently asked questions
- What does the MXL designation tell me?
- MXL is the minimum-pitch tooth profile, with a nominal pitch of 0.08 in (2.032 mm). The number in front of it is the pitch length in hundredths of an inch, which is how the belt is sized.
- How can I identify the MXL belt my machine uses?
- Read the part number printed on the belt, or measure the pitch length of the old belt. Another option is to count the teeth and multiply by the pitch. If nothing is legible, send a photo and the measurements and we will help identify it.
- Can I replace one brand of MXL belt with another?
- Yes, provided the profile and pitch length are the same. Check that both the number and the suffix match the original; if you are unsure, send us the part number and we will confirm the equivalent.