Timing belt Gates 2310-14MGT
- Brand
- GATES
- Category
- Power transmission
- Subcategory
- Timing belts
- Series
- PowerGrip GT4
We reply promptly.
Tell us the quantity you need and request a quote by WhatsApp or email.
Can't find the exact model? Tell us the part number or model you need. We'll track it down and quote it, whether or not it appears in our catalog.
Description
GATES 2310-14MGT belongs to timing belt, part of our Power transmission range. Tell us how many you need by WhatsApp or email and we'll get back to you promptly with a quote for 2310-14MGT and any equivalents.
This Gates PowerGrip GT4 timing belt is identified by part number 2310-14MGT. It uses the 14MGT profile and measures 2310 mm in length, with a 14 mm pitch. It is a synchronous belt intended for drives where tooth engagement maintains timing between shafts.
Timing belts like this one are common on industrial drives that require synchronized motion, such as those found on production machinery, conveyors, and other equipment where slip must be avoided. The 14MGT profile and 2310 mm length define the belt's fit, so confirming both against the old belt or the drive specification is the first step.
To verify fit, check the marking on the back of the existing belt and compare the profile and length. If the marking is worn, measure the belt's length and count the teeth to confirm the pitch. The part number 2310-14MGT can also be used to request a quote directly.
Dimensions
- Profile
- 14MGT
- Pitch
- 14mm
- Length
- 2310mm
Frequently asked questions
- What does the part number 2310-14MGT refer to?
- It is the Gates part number for a PowerGrip GT4 timing belt with a 14MGT profile and a 2310 mm length. The pitch is 14 mm.
- How can I confirm this belt fits my drive?
- Compare the profile and length to the belt you are replacing. The marking on the back of the old belt should show the profile and length, or you can measure the length and pitch to confirm.
- What information should I send to request a quote?
- Send the part number 2310-14MGT, along with the quantity you need. If you are unsure about the profile or length, include the marking from the old belt or the drive specifications.