Timing belt Gates 2100-5M
- Brand
- GATES
- Category
- Power transmission
- Subcategory
- Timing belts
- Series
- PowerGrip HTD
We reply promptly.
Tell us the quantity you need and request a quote by WhatsApp or email.
Can't find the exact model? Tell us the part number or model you need. We'll track it down and quote it, whether or not it appears in our catalog.
Description
GATES 2100-5M belongs to timing belt, part of our Power transmission range. Tell us how many you need by WhatsApp or email and we'll get back to you promptly with a quote for 2100-5M and any equivalents.
The Gates PowerGrip HTD 2100-5M is a timing belt in the HTD 5M profile with a 2100 mm length and a 5 mm pitch. This page covers what those two figures tell you before you match the belt to a drive.
The profile sets the tooth form and the pitch. HTD 5M is a 5 mm pitch synchronous profile, so the belt meshes with a matching 5M pulley and the pitch fixes the tooth spacing along the whole length. The part number carries the length: 2100-5M is 2100 mm. On a synchronous drive the length and pitch together determine how the belt wraps the pulleys and where the teeth sit, so both figures matter when you compare a replacement against the belt on the machine.
Start by reading the marking on the back of the old belt and confirming the profile and length. If the marking is worn or the belt has been replaced before, measure the length and check the pulley profile rather than relying on the number alone. Send the part number, the profile and the length, and a photo of the belt and pulleys if that is easier. We carry Gates and can help confirm the right belt or suggest an equivalent.
Dimensions
- Profile
- HTD 5M
- Pitch
- 5mm
- Length
- 2100mm
Frequently asked questions
- What does the 2100-5M part number tell me?
- It is the Gates PowerGrip HTD belt in the HTD 5M profile with a 2100 mm length and a 5 mm pitch. The profile and pitch define the tooth form; the length is 2100 mm.
- How do I confirm this belt fits my drive?
- Check the old belt's back marking for the profile and length, and confirm the pulley is a 5M profile. If the marking is unreadable, measure the belt length and check the pulley tooth form.
- What should I send to request a quote?
- Send the part number 2100-5M, the profile HTD 5M and the length 2100 mm. If you are unsure, include a photo of the belt and the pulleys so we can help confirm it.