Timing belt Gates 1800-8MGT
- Brand
- GATES
- Category
- Power transmission
- Subcategory
- Timing belts
- Series
- PowerGrip GT4
We reply promptly.
Tell us the quantity you need and request a quote by WhatsApp or email.
Can't find the exact model? Tell us the part number or model you need. We'll track it down and quote it, whether or not it appears in our catalog.
Description
GATES 1800-8MGT belongs to timing belt, part of our Power transmission range. Tell us how many you need by WhatsApp or email and we'll get back to you promptly with a quote for 1800-8MGT and any equivalents.
A timing belt change is a good moment to look at the drive as a whole, not just the belt. This Gates PowerGrip GT4 belt carries the 1800-8MGT part number, with an 8MGT profile, an 1800 mm length and an 8 mm pitch. Before it goes on, check the pulleys and the rest of the drive so the new belt starts on a sound system.
Inspect the pulleys for worn teeth, corrosion, chips or material build-up in the grooves, and check that they run true with no looseness on the shafts. Confirm the flanges are secure and not bent, and that the belt path is clear of debris or anything that could rub. Look at the tensioner and idler as well, since a worn bearing or a sticking adjuster will shorten the life of any belt.
Alignment matters on a synchronous drive. Check that the pulleys line up with each other and that the shafts are parallel, then set tension according to the drive. Fit the 1800-8MGT belt by hand without forcing it over the flanges, rotate the drive through a few turns, and recheck alignment and tension before running it under load.
If you are matching a belt already in service, read the marking on the back and send us the part number. We carry Gates timing belts and can confirm the 8MGT profile and 1800 mm length for your application. Send the belt part number, the drive or equipment details and the quantity by WhatsApp or email, and our team will reply with a quote.
Dimensions
- Profile
- 8MGT
- Pitch
- 8mm
- Length
- 1800mm
Frequently asked questions
- What should I check on the drive before fitting this belt?
- Check the pulleys for worn or damaged teeth and build-up in the grooves, confirm they run true and that the flanges are secure, and inspect the tensioner and idler bearings. Also verify pulley alignment and shaft parallelism before you set tension.
- How do I confirm the 1800-8MGT is the right belt?
- Read the marking on the back of the belt you are replacing and compare the part number, profile and length. This belt is an 8MGT profile with an 1800 mm length and an 8 mm pitch. If you are unsure, send us the old marking and the drive details.
- What do you need to quote the Gates 1800-8MGT?
- Send the part number 1800-8MGT, the quantity and any drive or equipment details by WhatsApp or email. Our team will confirm the belt and reply with a quote.