Timing belt Gates 1760-8MX
- Brand
- GATES
- Category
- Power transmission
- Subcategory
- Timing belts
- Series
- PowerGrip GTX
We reply promptly.
Tell us the quantity you need and request a quote by WhatsApp or email.
Can't find the exact model? Tell us the part number or model you need. We'll track it down and quote it, whether or not it appears in our catalog.
Description
GATES 1760-8MX belongs to timing belt, part of our Power transmission range. Tell us how many you need by WhatsApp or email and we'll get back to you promptly with a quote for 1760-8MX and any equivalents.
This Gates PowerGrip GTX timing belt is identified by the part number 1760-8MX. It has an 8MX profile and a length of 1760 mm. Use it where a synchronous drive calls for this profile and length.
Timing belts in the 8MX profile are common on industrial drives that need precise synchronization, such as camshafts, pumps, and positioning axes. This belt is a direct way to match a drive that already specifies an 8MX profile and a 1760 mm length.
To confirm fit, check the marking on the back of the old belt or the drive documentation. The profile and length must match exactly. If the old belt is worn or the marking is unreadable, measure the length and count the teeth to verify the pitch. For a quote, send the part number 1760-8MX, the profile, and the length.
If you are replacing more than one belt on the same drive, order them together so the set is consistent. Inspect the pulleys for wear and make sure the tension is set to the drive manufacturer's specification.
Dimensions
- Profile
- 8MX
- Pitch
- 8mm
- Length
- 1760mm
Frequently asked questions
- How do I confirm that the 1760-8MX is the right belt for my drive?
- Check the marking on the back of the old belt. It should show the profile 8MX and the length 1760 mm. If the marking is not clear, measure the length and verify the pitch.
- Can I use this belt on a drive that currently has a different profile?
- No. The profile and length must match the drive specification. An 8MX profile belt will not fit a drive designed for another profile.
- What information do I need to request a quote?
- Send the part number 1760-8MX, the profile 8MX, and the length 1760 mm. If you have the old belt, include a photo of the marking.