Timing belt Gates 1610-14MGT
- Brand
- GATES
- Category
- Power transmission
- Subcategory
- Timing belts
- Series
- PowerGrip GT4
We reply promptly.
Tell us the quantity you need and request a quote by WhatsApp or email.
Can't find the exact model? Tell us the part number or model you need. We'll track it down and quote it, whether or not it appears in our catalog.
Description
GATES 1610-14MGT belongs to timing belt, part of our Power transmission range. Tell us how many you need by WhatsApp or email and we'll get back to you promptly with a quote for 1610-14MGT and any equivalents.
The Gates PowerGrip GT4 1610-14MGT is a timing belt with a 14MGT profile, a 1610 mm length and a 14 mm pitch. This page covers how to match it to the belt you are replacing, so you can confirm the part number before requesting a quote. If you need help, send the marking from the back of the old belt and our team will confirm it or suggest an equivalent.
Start with the belt you are removing. Read the marking on the back of the belt and compare it to the data here: the profile should read 14MGT, the length should read 1610 mm and the pitch should read 14 mm. If the old belt is worn or the marking is unreadable, measure the length along the back of the belt and note the tooth profile and pitch. Send those details to our team and we will match them to the Gates PowerGrip GT4 1610-14MGT.
The part number 1610-14MGT combines the length and profile in a single code. When you request a quote, include that full part number, the quantity you need and the drive it runs on. If you are replacing more than one belt on the same drive, list each belt separately so we can confirm every position. We carry the Gates PowerGrip GT4 line and can help you verify the correct belt for your application.
Dimensions
- Profile
- 14MGT
- Pitch
- 14mm
- Length
- 1610mm
Frequently asked questions
- How do I confirm the Gates 1610-14MGT is the belt I need?
- Check the marking on the back of your old belt. It should show the 14MGT profile, a 1610 mm length and a 14 mm pitch. If the marking is missing or worn, measure the length and count the teeth, then send those details to our team for confirmation.
- What information should I send with my quote request?
- Send the part number 1610-14MGT, the quantity required and the equipment or drive where the belt is used. If you have the old belt, include a photo of the back marking. Our team will reply promptly and can help confirm the right belt or suggest an equivalent.
- Can you help if I am not sure about the profile or length?
- Yes. Send the dimensions you measured and any markings from the old belt. We will compare them to the Gates PowerGrip GT4 1610-14MGT data and let you know if it matches or if another belt is needed.