V-belt Gates 11M 825
- Brand
- GATES
- Category
- Power transmission
- Subcategory
- V-belts
- Series
- Polyflex
We reply promptly.
Tell us the quantity you need and request a quote by WhatsApp or email.
Can't find the exact model? Tell us the part number or model you need. We'll track it down and quote it, whether or not it appears in our catalog.
Description
GATES 11M 825 belongs to v-belt, part of our Power transmission range. Tell us how many you need by WhatsApp or email and we'll get back to you promptly with a quote for 11M 825 and any equivalents.
This is a Gates Polyflex narrow V-belt with the part number 11M 825. The profile and 825 mm length are the two specifications that matter most when matching a belt to a drive. Use both to confirm the belt fits your application before ordering.
The 11M profile identifies the cross-section of this Polyflex narrow V-belt. The 825 mm length is the datum you compare against the old belt or the drive specification. When you have the old belt in hand, read the marking on the back and confirm it matches 11M 825.
If you are sourcing a replacement, send the part number 11M 825, the profile, and the 825 mm length in your quote request. If the marking is worn or unreadable, measure the old belt and note the profile and length so we can help confirm the correct belt.
For drives that use multiple belts, replace the full set at the same time so the belts share the load evenly. Inspect the sheaves for wear or debris while the belts are off, and confirm the drive is aligned before installing the new set.
Dimensions
- Length
- 825mm
Frequently asked questions
- What do the profile and length tell me about this belt?
- The 11M profile defines the cross-section, and 825 mm is the length. Both must match the drive for the belt to fit and run correctly.
- How do I confirm this is the right belt for my drive?
- Check the marking on the back of the old belt. If it reads 11M 825, this is the same size. If the marking is unreadable, measure the old belt and note the profile and length.
- What should I send to request a quote?
- Send the part number 11M 825, the profile, and the 825 mm length. If you have the old belt, include a photo of the back marking to help confirm the match.