V-belt Gates 11M 730 JB
- Brand
- GATES
- Category
- Power transmission
- Subcategory
- V-belts
- Series
- Polyflex JB
We reply promptly.
Tell us the quantity you need and request a quote by WhatsApp or email.
Can't find the exact model? Tell us the part number or model you need. We'll track it down and quote it, whether or not it appears in our catalog.
Description
GATES 11M 730 JB belongs to v-belt, part of our Power transmission range. Tell us how many you need by WhatsApp or email and we'll get back to you promptly with a quote for 11M 730 JB and any equivalents.
The Gates 11M 730 JB is a Polyflex JB narrow V-belt with a length of 712 mm. If you are replacing a worn belt, start by reading the marking on the back of the old belt. The part number you find there is the fastest way to confirm you are specifying the same belt.
The marking typically shows the section and the length. On this belt, the code is 11M 730 JB, and the length is 712 mm. Use both when you compare the old belt to the replacement. A belt that has stretched or worn may not measure exactly the same as its original length, so the printed marking is more reliable than a tape measure.
Once you have the marking, send it to us by WhatsApp or email. We carry the Gates 11M 730 JB and can quote it by part number. If the belt is part of a multi-belt drive, note how many belts the drive uses and whether they were installed as a set. Replacing all belts on the drive at the same time helps keep tension even across the set.
Dimensions
- Length
- 712mm
Frequently asked questions
- How do I identify the correct replacement belt?
- Read the marking on the back of the old belt. The Gates 11M 730 JB is a Polyflex JB narrow V-belt with a 712 mm length. Send us that marking and we will confirm the part.
- What should I send with my quote request?
- Send the full belt marking, the quantity you need, and a photo of the old belt if the printing is hard to read. For drives with multiple belts, include the number of belts in the set.
- Can I replace just one belt on a multi-belt drive?
- On a drive that uses more than one belt, it is common practice to replace the full set at the same time. This helps maintain consistent tension and wear across all belts on the drive.