V-belt Gates 11M 710
- Brand
- GATES
- Category
- Power transmission
- Subcategory
- V-belts
- Series
- Polyflex
We reply promptly.
Tell us the quantity you need and request a quote by WhatsApp or email.
Can't find the exact model? Tell us the part number or model you need. We'll track it down and quote it, whether or not it appears in our catalog.
Description
GATES 11M 710 belongs to v-belt, part of our Power transmission range. Tell us how many you need by WhatsApp or email and we'll get back to you promptly with a quote for 11M 710 and any equivalents.
This Gates Polyflex belt is a narrow V-belt with the profile 11M and a length of 710 mm. For a maintenance or purchasing professional, the profile and length are the two dimensions that determine whether the belt will sit correctly in the pulley grooves and run at the right center distance. Use both numbers when you compare against the belt you are replacing.
The 11M profile identifies the cross-section that must match the pulley groove. The 710 mm length gives you the datum length to check against your drive layout. If your current belt is marked 11M 710, this is the same profile and length. If the marking is worn, measure the old belt and confirm the profile before ordering.
Because this is a Polyflex narrow V-belt, it is built for compact, high-speed drives where a standard V-belt would be too wide. The 11M section and 710 mm length are the key selection data. Send both numbers with your quote request so we can confirm the belt or suggest an equivalent that fits the same pulleys.
Dimensions
- Length
- 710mm
Frequently asked questions
- What do the profile and length tell me about this belt?
- The 11M profile defines the cross-section that fits the pulley groove. The 710 mm length defines the belt length around the drive. Both must match your application.
- How do I confirm this is the right belt for my drive?
- Check the marking on the back of your old belt. If it reads 11M 710, this belt matches that profile and length. If the marking is not clear, measure the old belt and send the profile and length.
- What should I send to request a quote?
- Send the part number 11M 710, the brand Gates, and the quantity you need. If you are replacing a belt with a different marking, include the profile and length from the old belt so we can help confirm the match.