V-belt Gates 11M 1950 JB
- Brand
- GATES
- Category
- Power transmission
- Subcategory
- V-belts
- Series
- Polyflex JB
We reply promptly.
Tell us the quantity you need and request a quote by WhatsApp or email.
Can't find the exact model? Tell us the part number or model you need. We'll track it down and quote it, whether or not it appears in our catalog.
Description
GATES 11M 1950 JB belongs to v-belt, part of our Power transmission range. Tell us how many you need by WhatsApp or email and we'll get back to you promptly with a quote for 11M 1950 JB and any equivalents.
The Gates Polyflex JB belt is a narrow V-belt built for compact, high-speed drives where a standard profile will not fit. This listing is for the 11M profile at 1932 mm, and the JB marking identifies the belt within the Polyflex JB series. Read the profile and the length together before you order, since both must match the drive.
The 11M profile sets the cross-section and the way the belt sits in the pulley groove. The 1932 mm length is the datum you compare against the belt you are removing or the drive drawing. On a Polyflex JB drive, a belt of the wrong profile will not seat correctly, and a belt of the wrong length will not tension correctly, so treat the two figures as a pair.
The part code 11M 1950 JB is what you should quote when you contact us. If the old belt is still on the machine, read the marking on the back and send that string exactly as printed, including the JB suffix. If the belt is gone, check the drive drawing or measure the length and confirm the profile before you request a quote.
Dimensions
- Length
- 1932mm
Frequently asked questions
- What does the 11M profile mean on this Gates Polyflex JB belt?
- The 11M is the profile of this Polyflex JB narrow V-belt. It defines the cross-section that must match the pulley groove on your drive. Confirm it against the marking on the belt you are replacing or against the drive documentation.
- How do I confirm the 1932 mm length is correct?
- Compare 1932 mm with the length shown on the belt you are removing or on the drive drawing. The 11M profile and the 1932 mm length must both match, so check the two together rather than the length alone.
- What should I send to get a quote for this belt?
- Send the full code 11M 1950 JB by WhatsApp or email, along with the quantity you need. If you are unsure of the profile or length, include the marking from the back of the old belt so we can confirm the right belt for your drive.