V-belt Gates 11M 1500 JB
- Brand
- GATES
- Category
- Power transmission
- Subcategory
- V-belts
- Series
- Polyflex JB
We reply promptly.
Tell us the quantity you need and request a quote by WhatsApp or email.
Can't find the exact model? Tell us the part number or model you need. We'll track it down and quote it, whether or not it appears in our catalog.
Description
GATES 11M 1500 JB belongs to v-belt, part of our Power transmission range. Tell us how many you need by WhatsApp or email and we'll get back to you promptly with a quote for 11M 1500 JB and any equivalents.
The Gates Polyflex JB 11M 1500 JB is a Polyflex narrow V-belt with a 1482 mm length. When replacing a worn belt, matching the profile and length on the old belt is the first step. This page covers how to confirm the 11M 1500 JB against the belt you are removing.
Start with the marking on the back of the belt you are replacing. The part number 11M 1500 JB identifies the profile and the length, so compare it directly with the old belt. If the marking is worn or unreadable, measure the outside length and note the cross-section shape. The 1482 mm length is the figure to match. A belt that is the same profile but a different length will not fit the drive correctly.
The Gates Polyflex JB series is a narrow V-belt construction. The 11M profile is part of the part number, and the 1482 mm length is stated in the data. When you have the old belt in hand, check that the profile matches and that the length is 1482 mm. If the drive uses more than one belt, replace the full set so the load stays even across the grooves.
Send the part number 11M 1500 JB by WhatsApp or email to request a quote. If the old belt marking is unclear, send a photo of the belt and the drive, along with the measured length and profile. The team can confirm the 11M 1500 JB or suggest an equivalent.
Dimensions
- Length
- 1482mm
Frequently asked questions
- How do I confirm the 11M 1500 JB is the right belt for my drive?
- Check the marking on the back of the belt being replaced. The 11M 1500 JB has a 1482 mm length. If the old belt shows the same profile and length, it is the correct match. If the marking is gone, measure the outside length and note the cross-section.
- What should I send to get a quote for this belt?
- Send the part number 11M 1500 JB by WhatsApp or email. If you are unsure, include a photo of the old belt and the drive, plus the measured length and profile. The team will confirm the belt or suggest an equivalent.
- Should I replace all belts on the drive at the same time?
- If the drive uses multiple belts, replace them as a set. Mixing a new belt with worn belts can cause uneven tension and load. Order the number of belts the drive requires.